2" O.D. x 8" Wide Sheet Extrusion 3-Roll Stack
Stock #21726-218A
Used 2" O.D. x 8" Wide Randcastle Sheet Extrusion 3-Roll Stack including Pull Roll Station and Single Position Winder.
Ubicación: En las instalaciones de Perry (Hainesport, NJ - USA)
Obtener un presupuesto Ver detalles
24" x 12" 3-Roll Cooling Roll Stack
Stock #21412-2
Used 24" Wide 3-Roll Down-Stack Cooling Roll Stack (3) 12" diameter rolls Approximately 5' cooling conveyor Rbber to metal pull roll assembly Chill rolls driven by a 5HP DC motor without drive Pull rolls are driven by a 1HP DC...
Ubicación: En las instalaciones de Perry (Hainesport, NJ - USA)
Obtener un presupuesto Ver detalles Ver vídeo
30" Wide Johnson 3-Roll Sheet Down Stack
Stock #ZP57684-1
Used Johnson 16" diameter X 30" wide three-roll sheet down stack. Pneumatically operated cored chrome rolls, rolls are driven by a silent chain drive, drive gearboxes for both the chrome rolls and the pull rolls operate at 1.0, 2.07, 5.058...
Ubicación: Medio Oeste de EE.UU.
Obtener un presupuesto Ver detalles
34" Wide Cincinnati Milacron 2-Roll Cooling Roll Stack
Stock #ZP58170
Used Cincinatti Milacron 2-roll cooling roll stack including unwind. Also included in package is the following: – 18"X34" wide 2-roll chrome plated cooling rolls – Driven by 5 HP DC motor Rolls are cooled via (3) 5 HP pumps with...
Ubicación: Medio Oeste de EE.UU.
Obtener un presupuesto Ver detalles
34" Wide Cincinnati Milacron 2-Roll Sheet Take-Off
Stock #715-469CR
Used 34" wide Cincinatti Milacron 2-roll sheet take-off with 34" face X 18" diameter rolls. Rolls are mounted in a vertical stack arrangement. Chromed and cored rolls with rotary unions, silent chain driven with 5 HP, 1750 DC motor through...
Ubicación: Medio Oeste de EE.UU.
Obtener un presupuesto Ver detalles
36" Wide Davis Standard Sheet Extrusion Line
Stock #ZP61339
Used 36" wide Davis Standard sheet extrusion line consisting of the following: – Used Davis Standard sheet extrusion line consisting of 4.5" Davis standard 34:1 L/D extruder driven by a 250 HP DC motor with SCR control. Has electrically heated...
Ubicación: Medio Oeste de EE.UU.
Obtener un presupuesto Ver detalles
40" Wide Johnson Sheet Extrusion Line
Stock #ZP60327
Used 40" wide Johnson sheet extrusion line consisting of the following: – 4.5" Johnson 24:1 L/D vented extruder with water/air cooling on barrel. Includes DC motor with Pacemaster DC drive and 11.1:1 gearbox ratio. Includes temperature control panel and Beringer...
Ubicación: Medio Oeste de EE.UU.
Obtener un presupuesto Ver detalles
40" Wide Sterling Co-Extrusion Sheet Line
Stock #ZP60105
Used 40" wide Sterling co-extrusion sheet line. reconditioned in 1998-2000 to produce films of synthetic paper 4-20 mils thick. Line consists of the following: – 3.5" Sterling 30:1 L/D extruder driven by a 125 HP DC motor with Allen Bradley...
Ubicación: México
Obtener un presupuesto Ver detalles
41" Wide Welex Sheet Extrusion Stack
Stock #20773-1ST
Used 18" X 41" Welex 3-roll sheet extrusion stack. Model 18X41RHSL, serial #4750. Rolls are silent chain driven, and air actuated nipping pressure with 8.5" OD cylinders. Has 42" wide rubber to metal 6" diameter pull roll package driven by...
Ubicación: En las instalaciones de Perry (Hainesport, NJ - USA)
Obtener un presupuesto Ver detalles
48" Wide Davis Standard Sheet Take-Off Unit
Stock #9323-07
Used Davis Standard sheet take-off unit consisting of (3) 48" face rolls mounted in a vertical arrangement for a downstack operation. All three rolls measure 16" in diameter. Top roll is tungsten and the middle and bottom are chrome. Top...
Ubicación: Medio Oeste de EE.UU.
Obtener un presupuesto Ver detalles
50" Wide Processing Technologies Inc 3-Roll Down Stack
Stock #ZP61834
Used Processing Technologies Inc. 3-roll downstack Model 5024 24" diameter X 50" wide lower 2 chrome rolls Upper roll is 12" X 50" All chrome rolls cored for cooling Rolls are hydraulically operated and powered by a 7.5 HP DC...
Ubicación: Medio Oeste de EE.UU.
Obtener un presupuesto Ver detalles
54" Wide Marshall and Williams Sheet Take-Off Unit
Stock #9323-10
Used Marshall and Williams sheet take-off unit consisting of (3) 54" face rolls mounted in a vertical arrangement for a downstack operation. All three rolls measure 16" in diameter and are ceramic coated. Top and bottom rolls are air actuated....
Ubicación: Medio Oeste de EE.UU.
Obtener un presupuesto Ver detalles
55" Wide PVC Board Production Line
Stock #XZS63742
Used Battenfeld-Cincinnati PVC board production line was manufactured in 2012 and shut down in 2017. Running hours about 1110 hours. Electric devices manufactured by Siemens (Germany). CE marked. Main Equipment List: 1) 135mm Twin Screw Extruder Manufacturer: Battenfeld-Cincinnati (Germany) (Group...
Ubicación: ASIA
Obtener un presupuesto Ver detalles
56" x 24" Co-Extrusion Sheet Extrusion Line
Stock #21759-1
Used 54" Wide Battenfeld Gloucester Co-Extrusion Sheet Extrusion Line, previously used for approximately 1200 lbs. per hour polypropylene sheet. Line consists of the following: (3) Acrison volumetric feeders without controls 6" Batttenfeld Gloucester 30/1 L/D extruder driven by 500 hp...
Ubicación: Sur de Estados Unidos
Obtener un presupuesto Ver detalles
56" Wide x 24" Vertical 3-Roll Stack
Stock #21759-5
Used 56" wide x 24" Gloucester Vertical 3-Roll Stack With Individual Roll Drives. Includes operator control panel with roll drives. Has hydraulically actuated rolls and includes hydraulic pump. No cooling pumps or pull rolls included.
Ubicación: Sur de Estados Unidos
Obtener un presupuesto Ver detalles
66" Wide Sterling Sheet Extrusion Line
Stock #ZP60422
Used Sterling sheet extrusion line consisting of the following: 4.5" Sterling 36:1 L/D single screw extruder driven by a 200 HP DC motor with SCR control. Extruder has 78" centerline. Previously used extruding horizontally into chill roll chrome nip roll....
Ubicación: Canadá
Obtener un presupuesto Ver detalles
8" x 2" Laboratory Sheet Extrusion Line
Stock #21726-218
Used Randcastle Laboratory Sheet Extrusion Line Consiting of the Following Items: – .75" Randcastle 24/1 L/D extruder with temperature control panel, model RCP0750, serial #J2271. – 2" O.D. x 8" wide chill roll stack, including pull roll station and single...
Ubicación: En las instalaciones de Perry (Hainesport, NJ - USA)
Obtener un presupuesto Ver detalles
Pull Roll Stand (2) 54" x 8" Dia. Rubber Covered Rolls
Stock #21729-2
Used Johnson roll pull roll stand Has (2) 54" x 8" diameter rubber covered rolls Rolls are driven by 10 hp DC motor Drive-All 4-speed gearbox Air actuated top pull roll
Ubicación: Medio Oeste de EE.UU.
Obtener un presupuesto Ver detalles
Español 
English