Continuous Mixers

10″ Wide 6′ Long Baker Perkins Model MP1072 304 Stainless Steel Double Arm Continuous Mixer

Stock #182-049

10″ Wide 6′ Long Baker Perkins Model MP1072 304 Stainless Steel Double Arm Continuous Mixer

Stock #182-049

Used Baker Perkins model 11a=MP-11A1072 double arm continuous mixer. 10″ wide X 6′ long chamber. With dual mixing screws mounted one above the other. 304 ELC stainless steel contacts. 304 stainless steel jacket rated for 80 psi. Includes 14″ diameter...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

10″ Diameter Farrel Model 350/240 MVX Continuous Mixer

Stock #ZP62032

10″ Diameter Farrel Model 350/240 MVX Continuous Mixer

Stock #ZP62032

Used Farrel model 350/240 MVX continuous mixer for rubber compound. Rated at approximately 4500 lbs per hour capacity requiring approximately 1000 kW electrical energy when installed. Material is continuously fed into the “mixing chamber” where entrapped gases and Volitals are...

Location: N/A

Add to Cart View Details

12″ Diameter 96″ Long Readco Twin Screw Processor

Stock #2212

12″ Diameter 96″ Long Readco Twin Screw Processor

Stock #2212

Used 12″ DIA. Readco twin screw processor. Mixing chamber with 12″ diameter overlapping screw segments 96″ long. With 3″ transition section to 10″ diameter. 41″ long metering discharge section. 3-zone jacketed barrel formerly driven by 40 HP DC drive that...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

3″ Diameter Buss Model PR70/120 Stainless Steel Kneader

Stock #719-10

3″ Diameter Buss Model PR70/120 Stainless Steel Kneader

Stock #719-10

Used 70mm Buss kneader model pr70/120. 13/1 L/D, serial #45163C-1, new 1995. Has stainless steel chamber, driven by approximately 60HP (45kW) AC motor, 1475 rpm with Siemens variable frequency drive. Has jacketed chamber for liquid cooling/heating and includes (3) Regoplas...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

4″ DIA FARREL CP45 NO CONTROLS

Stock #ZP62243

4″ DIA FARREL CP45 NO CONTROLS

Stock #ZP62243

Used Farrel Limited continuous mixer/extruder combination. (CP45?) continuous mixer with dual rotor set, 4″ O.D. each discharging into a single screw extruder (no screw) 5″ O.D. Includes motors for continuous mixer and extruders, but no operator controls or motor drives.

Location: Russia

Add to Cart View Details

9″ Diameter Farrel FCM Continuous Mixer

Stock #ZP59340

9″ Diameter Farrel FCM Continuous Mixer

Stock #ZP59340

Used #9 Farrel FCM continuous mixer. Driven by a 700 HP DC motor, 735 rpm, 525 VDC, 1050 amp fl. Without SCR control. Has #15 style quick disconnect rotors, but rotors screws and liner are bad. Includes hydraulic pumping system...

Location: Northeast USA

Add to Cart View Details