2" Diameter Fuji Paudal Model EXDFRS-60 Stainless Steel Twin Screw Extruder
Stock #L1167-02
Used Fuji Paudal model EXDFRS-60 stainless steel twin screw extruder. Twin 60mm diameter augers fitted with 0.5mm mesh screen. Unit is top manual infeed. Unit is driven by a amp, volt, 3 phase, 50 hz motor.
Location: Perry England Warehouse
Get a Quote View Details
55#/Minute Fine Disc Pelletizer 304 Stainless Steel
Stock #X8670V-08
Little used Fuji Paudal model PV-20 fine disc pelletizer. 304 stainless steel contact parts. Rated 500-1500 kg/hr depending on product. Has (4) rotating wheels which push product through the die plate. Pellets fall onto rotating disc below and are marumerized...
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
Alexanderwerk Model GA65/SKM/NR Stainless Steel Granulator
Stock #L1302-02
Used Alexanderwerk Model GA65/SKM/NR stainless steel granulator. 1 x perforated die cylinder 70mm diameter with 1mm holes and 1 x solid pressure cylinder 60mm diameter. Working length 80mm. Approximate throughput range 30-50 kg/hr. Driven by a 1.5 kw, 3/50, 415...
Location: Perry England Warehouse
Get a Quote View Details
Alexanderwerk Stainless Steel Rotor Fine Granulator
Stock #21485-06
Used Alexanderwerk Stainless Steel Rotor Fine Granulator Model: RFG 350 V Rotor dimensions: 13" dia. x 14-3/4", with 1" wide blades Circle screen, front access door, top feed, bottom discharge Driven by an approximate 2 hp variable speed gear motor...
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
Apex Type Multiplex DUA-12 Stainless Steel Oscillating Granulator
Stock #L1308-07
Used Apex Multiplex DUA-12 stainless steel oscillating granulator. Has approximately 150mm x 150mm feed throat. 4-blade oscillating/rotating rotor driven by 0.75 kw 415 volt 3/50 variable speed motor. Mounted on stainless steel base with 4-wheels.
Location: Perry England Warehouse
Get a Quote View Details
Bepex Model GCS200/60 Stainless Steel Extruder/Pelletizer
Stock #L1098-06
Used Bepex model GCS200/60 stainless steel extruder/pelletizer. 200mm diameter X 60mm wide twin dies. Maximum throughput is 60 to 180 kg per hour. Stainless steel hopper. 7.5 kW, 240/480 volt main drive.
Location: Perry England Warehouse
Get a Quote View Details
Caleva Model 380A Stainless Steel Spheronizer
Stock #L1302-03
Used Caleva Model 380A stainless steel spheronizer. Unit has a 380mm diameter bowl. 250g to 5kg batch size with an approximate output of 50kg per hour. Unit is driven by a 1.5kw, 415 volt, 3 phase, 50 hz motor. Mounted...
Location: Perry England Warehouse
Get a Quote View Details
Comil Stainless Steel Grinder
Stock #517-20924
Used stainless steel 10 HP Comil grinder.
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
FREWITT CENTRIFUGAL GRANULATOR
Stock #RG1062
Used Frewitt stainless steel granulator. Approximate rotor length: 580mm. Feed hopper: 600×260 mm. Sieve micron: 1 mm. Clamp on discharge flange: external diameter 64 mm – internal diameter 50 mm. Driven by a 5.5kw motor.
Location: EU
Get a Quote View Details
Frewitt MFH-6 Stainless Steel Hammer Mill
Stock #X828-1115
Used Frewitt MFH-6 Stainless Steel Hammer Mill Manufacturer: Frewitt Model: MFH-6 Serial: 5078510125 Flow rate up to 1200 kg/hr at maximum speed of 6000 rpm Hammer Mill within 2-glove containment unit Stainless steel construction Mounted on casters
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
Frewitt Model MGE Fully Stainless Steel Oscillating Granulator
Stock #H4306-2
Used Frewitt model MGE fully stainless steel oscillating granulator. Stainless steel horizontal rotor diameter 120 mm x 490 mm length driven via Stober varispeed gearbox by Bauknecht 1,1kW/50Hz/380V electric motor. Conical inlet diameter 170 mm and round bottom outlet 215...
Location: Perry Czech Warehouse
Get a Quote View Details
Fuji Paudal Model QJ-400G Stainless Steel Marumerizer
Stock #L1108-02
Used Fuji Paudal model QJ-400G stainless steel marumerizer. Mounted on wheels.
Location: Perry England Warehouse
Get a Quote View Details
Gea Niro Nica Model S-700 Stainless Steel Spheronizer
Stock #RG2006
Used Gea Niro Nica Model S-700 stainless steel spheronizer. Unit has a 700 mm diameter bowl. 7-10 kg batch size, rotates 100-600 rpm. Unit is driven by a 3.7kW/460/60Hz electric motor. Mounted in stainless steel frame with castors. Stainless steel...
Location: South Europe
Get a Quote View Details
Gericke Stainless Steel Nibbler Type NBS 300/450
Stock #VB0192-01
Used GERICKE stainless steel nibbler type NBS 300/450 n°2098 Inlet section 530 x 290 mm Rotor equipped with 4 blades Rotor driven by geared motor Grinding chamber equipped with a Ø 10mm screen On steel frame, without electrical cabinet, with...
Location: NEUVILLE EN FERRAIN - FRANCE
Get a Quote View Details
Gericke Type N450X800 MK2 Stainless Steel / Mild Steel Nibbler
Stock #L1528-01
Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & screen. Unit direct driven with motor/gearbox. Has approximate throughput capacity of 30,000 l/h (product dependent).
Location: Newton Aycliffe, UK
Get a Quote View Details Watch Video
Gericke Type N450X800 MK2 Stainless Steel / Mild Steel Nibbler
Stock #L1528-02
Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & 8mm screen. Unit direct driven by 5.5kW 3/50 geared motor. Has approximate throughput capacity of 30,000 l/h (product dependent). Click on...
Location: Newton Aycliffe, UK
Get a Quote View Details Watch Video
Gericke Type N450X800 MK2 Stainless Steel / Mild Steel Nibbler
Stock #L1528-03
Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & screen. Unit direct driven by Brook Crompton 5.5kw motor through David Brown gearbox. Has approximate throughput capacity of 30,000 l/h (product...
Location: Newton Aycliffe, UK
Get a Quote View Details Watch Video
Glatt Type GRS-100 Stainless Steel Granulator Screen
Stock #L0731-01
Used Glatt type GRS-100 stainless steel granulator/screen. Screen size 100mm diameter X 100mm long. Hinged stainless steel feed Cone. Manual raise/lower. Driven by a 1.1 kW electric motor through a variable speed gearbox. Mounted on a stainless steel mobile frame....
Location: Europe
Get a Quote View Details
Glatt Type GS100 Stainless Steel Granulator Screen
Stock #L1496-02
Used Glatt type GS100 stainless steel granulator/screen. Unit has 0.75kw motor with belt drive. Has (2) cone screens. Unit is mounted on mobile base. Click on the link below to see a video of the machine running.
Location: Newton Aycliffe, UK
Get a Quote View Details Watch Video
Hosokawa Bepex Model BX150 Stainless Steel Low Pressure Extruder
Stock #H4347
Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow...
Location: Perry Czech Warehouse
Get a Quote View Details
Jackson Crockatt Model No. 6 Stainless Steel Reciprocating Granulator
Stock #L1307-07
Used Jackson Crockatt model no. 6 stainless steel reciprocating granulator. Has approximately 152mm diameter 3-blade rotor. Driven by 0.37 kW, 240-415 volt, 3/50, 1380 rpm motor. Mounted on stainless steel frame with wheels. Rated up to 63 kg/hr depending on...
Location: Perry England Warehouse
Get a Quote View Details Watch Video
Jackson Crockatt Model No. 6 Stainless Steel Reciprocating Granulator
Stock #L1159-07
Used Jackson Crockatt model no. 6 stainless steel reciprocating granulator. Has approximately 152mm diameter 3-blade rotor. Driven by 0.37 kW, 220/250-380/440 volt, 3/50, 1425 rpm motor. Mounted on carbon steel frame. Rated up to 63 kg/hr depending on product and...
Location: Perry England Warehouse
Get a Quote View Details
KEK Kemutec Model 120 CM Stainless Steel Cone Mill
Stock #H4395-1
Used Kemutec KEK Model 120 CM stainless steel cone mill. Has a round blates beater direct top driven by LS Leroy Somer electric motor 0,75kW, 220-480V, 3ph/50Hz, 2840rpm. Motor is Atex rated: II 2G EExde II B T4. Rotor/blade has...
Location: Perry Czech Warehouse
Get a Quote View Details
Kason Kek Model CM170UG Stainless Steel Cone Mill
Stock #L1509-06
Reportedly unused Kason Kek model CM170UG stainless steel cone mill. Unit includes main electric drive. Unit is mounted on stainless steel mobile stand. Click on the link below to see a video of the machine running.
Location: Newton Aycliffe, UK
Get a Quote View Details Watch Video
Kovymont Model S400 Stainless Steel Oscillating Granulator
Stock #HG62175
Used Kovymont model S400 stainless steel oscillating granulator. Has approximately 122 mm diameter x 480 mm lenght 5-blade rotor. Rotor is driven by el. motor 1,1 kW, variable speed 100-220 rpm. No screen included.
Location: Central Europe
Get a Quote View Details
Luwa Marumerizer Stainless Steel Spheronizer
Stock #21380-02
Used Luwa Marumerizer Stainless Steel Spheronizer Model: QJ-700V 700 mm dia. bowl 304 stainless steel cooling jacket Rotation speed 300-700 rpm Side product discharge with flush outlet Belt driven Mounted on wheels Click on the link below to see a...
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details Watch Video
Metalchem Torun (Poland) Type PGM/K Stainless Steel vertical rotor granulator
Stock #U2308-19
Used vertical rotor granulator made in Metalchem Torun (Poland) type PGM/K. All construction made of stainless steel. Reported output up to 400 kg/h depending on product and size of the screen. Machine is driven by electric motor 2,2 kW motor....
Location: Perry Poland Warehouse
Get a Quote View Details Watch Video
Metalchem Torun (Poland) Type PGM/K Stainless Steel vertical rotor granulator
Stock #U2308-21
Used vertical rotor granulator made in Metalchem Torun (Poland) type PGM/K. All construction made of stainless steel. Reported output up to 400 kg/h depending on product and size of the screen. Machine is driven by electric motor 2,2 kW motor....
Location: Perry Poland Warehouse
Get a Quote View Details Watch Video
Mild Steel Crusher 350 x 180 mm
Stock #VB0007-173
Used Mild steel crusher-Opening 350 x 180 mm-Motor : BONFIGLIOLI – Rpm 3000 – 184 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Get a Quote View Details
Niro Fielder Model PMA-300 Stainless Steel High Shear Granulating Mixer
Stock #734-39983
Used Niro Fielder model PMA-300 300 liter high shear granulating mixer. Stainless steel construction. With 10 HP chopper on stainless steel base.
Location: Midwest USA
Get a Quote View Details
Niro Fielder Nica Model S-450 Stainless Steel Spheronizer
Stock #ZG679-35925
Used Niro Fielder NICA model S-450 spheronizer. Stainless steel construction. 450mm diameter bowl. Nominally rated .4-2 kg batch size. Approximately 1.5 kW variable speed motor. 380/415 volt, 3 phase, 50 hertz. On base with controls.
Location: Midwest USA
Get a Quote View Details
Pennwalt Stokes Model 900-44-0 Stainless Steel Tornado Mill
Stock #U1986-8
Used Pennwalt Stokes model 900-44-0 stainless steel tornado mill. Has four swing knives belt driven by 5 HP, 208-230/460 volt, 3 phase, 60 cycle, 3450 rpm motor. Includes screens. Mounted on wheels.
Location: Perry Poland Warehouse
Get a Quote View Details
Prater Model SRV1 Stainless Steel Oscillating Granulator
Stock #560-S335
Used Prater model SRV1 stainless steel oscillating granulator.
Location: Northeast USA
Get a Quote View Details
Quadro Model U10 Stainless Steel Comil
Stock #ZG711-37290
Used Quadro model U10 Comil. Stainless steel construction. With beater and screen. Direct coupled 20 HP, 230/460 volt XP motor with VFD controller mounted in XP panel. Mounted in Carlisle life science isolator. Single-sided with (5) glove ports. Approximately 60"...
Location: Midwest USA
Get a Quote View Details
Stainless Steel Pre-Crusher
Stock #U2014-7
Used stainless steel pre-crusher with siefter. One shaft belt driven by electric motor 7.5 kW, 380 V, 15.3 a, 1455 rpm. Motor side pulley has diameter 80 mm and crusher side pulley has diameter 400 mm what gives working rotation...
Location: Perry Poland Warehouse
Get a Quote View Details
Stokes Stainless Steel Tornado Mill, Model 44-0
Stock #21432-03
Used Stokes Stainless Steel Tornado Mill Model: 44-0 Serial: 662678-1 Driven by approximately 10 hp motor
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
Used Stainless Steel Occillating Granulator Frewitt Model MG 633
Stock #UG6374
Used horizontal stainless steel oscillating granulator by Frewitt (CH) model MG 633. Machine has rotor with length 431 mm x diameter 121 mm. Drive 1 kW, 2850 rpm, 380 V, 50 hz. Output depends on product and sieve and can...
Location: Poland
Get a Quote View Details
Used Stainless Steel Twin Shafts Delumper With Screw Discharge
Stock #U2435-7
Used stainless steel twin shaft powder delumper with screw discharge. Machine has feeding inlet dimensions: L 100 cm x W 60.5 cm. It has two shafts, each with 5 bolted segments. One segment has 7 welded pins in 6 rows....
Location: Perry Poland Warehouse
Get a Quote View Details
Vector Colton Model 570 Stainless Steel Granulator
Stock #7107-21
Used Vector Colton model 570 granulator. Stainless steel contacts. 3 HP, 1 phase, 60 cycle, 230/460 volts. On base. Stop/start push button controls. Serial #40813.
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details