Granulator, Drug Mill & Occillating Mills

Alpine Type 100 UPZ Stainless Steel Pin Mill

Stock #743-6966

Alpine Type 100 UPZ Stainless Steel Pin Mill

Stock #743-6966

Used Alpine type 100 UPZ stainless steel pin Mill. Equipped with 1/2 HP K-Tron 100 L/hour screw feeder. Mounted on stainless steel base with caster. Control panel

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

Bepex Model GCS200/60 Stainless Steel Extruder/Pelletizer

Stock #L1098-06

Bepex Model GCS200/60 Stainless Steel Extruder/Pelletizer

Stock #L1098-06

Used Bepex model GCS200/60 stainless steel extruder/pelletizer. 200mm diameter X 60mm wide twin dies. Maximum throughput is 60 to 180 kg per hour. Stainless steel hopper. 7.5 kW, 240/480 volt main drive.

Location: Perry England Warehouse

Add to Cart View Details

Caleva Model 15 316 Stainless Steel Spheroniser

Stock #RG8959

Caleva Model 15 316 Stainless Steel Spheroniser

Stock #RG8959

Used Caleva “model 15” spheroniser in 316 stainless steel. 380mm DIA X 310mm deep product bowl (35 litres gross capacity), safety electrically interlocked guard. 110mm X 60mm finished product outlet. Rotor has a variable speed drive with motor stop/start. Machine...

Location: UK

Add to Cart View Details

Caleva Model 27 316 Stainless Steel Twin Disc Spheronizer

Stock #RG8662

Caleva Model 27 316 Stainless Steel Twin Disc Spheronizer

Stock #RG8662

Used Caleva model 27 316 stainless steel twin disc spheronizer. Has (2) 685mm diameter X 225mm deep discs. Working capacity 7.5-30 litre (5-20kg) per disc. Driven by 7.5 kW 220/380 volt 3/50 variable speed motor at approximately 100-500 rpm. Has...

Location: EU

Add to Cart View Details

Diosna Model CAT600 Stainless Steel Granulation Suite

Stock #RG7004

Diosna Model CAT600 Stainless Steel Granulation Suite

Stock #RG7004

Used granulation suite consisting of the following: Diosna model cat 600 fluid bed drier with stainless steel cartridge filters, then through a vacuum transfer system on an adjustable height pedestal for different size bins, through a “Quadro” model U20 Comil,....

Location: AUSTRALIA

Add to Cart View Details

Empak (Poland) Model PGM-2 Stainless Steel Rotor Granulator

Stock #U2028-9

Empak (Poland) Model PGM-2 Stainless Steel Rotor Granulator

Stock #U2028-9

Used vertical rotor granulator made in Empak (Poland) model PGM-2. Contact parts made of stainless steel. Reported output from 200 to 400 kg/h depending on product and size of the screen. Machine is driven by electric motor 2,2 kW motor....

Location: Perry Poland Warehouse

Add to Cart View Details

Frewitt Model SGV Stainless Steel Granulator/Screen

Stock #H3645-2

Frewitt Model SGV Stainless Steel Granulator/Screen

Stock #H3645-2

Used Frewitt model SGV stainless steel granulator/screen. Granulator has hinged hopper Cone-shaped with hinged top lid. Granulation mechanism is mounted on the arm that can be manually lifted/lowered and is driven by EL. Engine Felten & Guilleaume 2,2 kW 220/380V,...

Location: CZ

Add to Cart View Details

Glatt Type GRS-100 Stainless Steel Granulator/Screen

Stock #L1159-04

Glatt Type GRS-100 Stainless Steel Granulator/Screen

Stock #L1159-04

Used Glatt type GRS-100 stainless steel granulator/screen. Screen size 100mm diameter X 100mm long. Hinged stainless steel feed Cone. Manual raise/lower. Fitted with control panel. Driven by a 1.1kW electric motor. Mounted on a stainless steel mobile frame.

Location: Perry England Warehouse

Add to Cart View Details

Glatt Type GRS-100 Stainless Steel Granulator Screen

Stock #L0731-01

Glatt Type GRS-100 Stainless Steel Granulator Screen

Stock #L0731-01

Used Glatt type GRS-100 stainless steel granulator/screen. Screen size 100mm diameter X 100mm long. Hinged stainless steel feed Cone. Manual raise/lower. Fitted with control panel. Driven by a 1.1kW electric motor through a variable speed gearbox. Mounted on a stainless...

Location: EU

Add to Cart View Details

Glatt Model TR160-02X 316 Stainless Steel Quick Sieve

Stock #661-32188

Glatt Model TR160-02X 316 Stainless Steel Quick Sieve

Stock #661-32188

Used Glatt model tr160-02 quick sieve 316 stainless steel. Approximate 9.5″ diameter X 7.5″ deep chamber. Approximate 20 liter top charge chute, side bottom outlet. Driven by 3 HP, 3 phase, 60 cycle, 460 volt, 3400 rpm motor, manual vari-speed...

Location: Midwest USA

Add to Cart View Details

Glatt Model TR160-02 316 Stainless Steel Mill

Stock #661-32246

Glatt Model TR160-02 316 Stainless Steel Mill

Stock #661-32246

Used Glatt model tr160-02 quick sieve 316 stainless steel Mill. Approximately 9.5″ diameter X 7.5″ deep chamber. With top charge chute, side bottom outlet. Driven by 3 HP, 3 phase, 60 cycle, 460 volt, 3400 rpm motor, manual vari-speed, rated...

Location: Midwest USA

Add to Cart View Details

Jackson Crockatt Model No. 6 Stainless Steel Reciprocating Granulator

Stock #L1159-07

Jackson Crockatt Model No. 6 Stainless Steel Reciprocating Granulator

Stock #L1159-07

Used Jackson crockatt model no 6 stainless steel reciprocating granulator. Has approximately 152mm diameter 3-blade rotor. Driven by 0.37 kW 220/250-380/440 volt 3/50 1425 rpm motor. Fitted with stop/start controls. Mounted on carbon steel frame. Rated up to 63 kg/hr...

Location: Perry England Warehouse

Add to Cart View Details

MAGMA GRANULATOR

Stock #HG62078

MAGMA GRANULATOR

Stock #HG62078

Used Magma (Czech republic) granulator stainless steel ganulator/screen. Granulator has screening surface 300 cm2, screen diameter 200 mm. Granulation mechanism is driven by el. motor 0,75 kW and has 37 RPM. Unit is mounted on stainless steel frame. Unit is...

Location: CZECH REPUBLIC

Add to Cart View Details

Manesty Rotogran 4 Granulator

Stock #L1159-09

Manesty Rotogran 4 Granulator

Stock #L1159-09

Used Manesty Rotogran 4 granulator. Belt driven by a 0.75kW, 1400rpm, 3PH, 50HZ electric motor. Fitted with stop/start controls. Mounted on carbon steel base.

Location: Perry England Warehouse

Add to Cart View Details

Nica Systems Type E140 316 Stainless Steel Extruder

Stock #RG8960

Nica Systems Type E140 316 Stainless Steel Extruder

Stock #RG8960

Used NICA systems type E140 extruder in 316 grade stainless steel. Swing out safety interlocked Fornt cover with 500mm wide feed port to the 230mm diameter product feed bowl incorporating a scraper arm on the 25mm diameter rotor shaft. 140mm...

Location: UK

Add to Cart View Details

Nica Systems Type S320 316 Stainless Steel Spheronizer

Stock #RG6629

Nica Systems Type S320 316 Stainless Steel Spheronizer

Stock #RG6629

Used 316 stainless steel NICA systems type S320 spheronizer. Has a 320mm diameter X 100mm deep bowl with a 35mm X 35mm safety locked product outlet. Perspex top cover with loading port. Variable speed handwheel. Includes control panel with stop/start,...

Location: UK

Add to Cart View Details

Niro Fielder Nica Model S-450 Stainless Steel Spheronizer

Stock #V679-35925

Niro Fielder Nica Model S-450 Stainless Steel Spheronizer

Stock #V679-35925

Used Niro Fielder NICA model S-450 spheronizer. Stainless steel construction. 450mm diameter bowl. Nominally rated .4-2 kg batch size. Approximately 1.5 kW variable speed motor. 380/415 volt, 3 phase, 50 hertz. On base with controls.

Location: Midwest USA

Add to Cart View Details

Stainless Steel Pre-Crusher

Stock #U2014-7

Stainless Steel Pre-Crusher

Stock #U2014-7

Used stainless steel pre-crusher with siefter. One shaft belt driven by electric motor 7.5 kW, 380 V, 15.3 a, 1455 rpm. Motor side pulley has diameter 80 mm and crusher side pulley has diameter 400 mm what gives working rotation...

Location: Perry Poland Warehouse

Add to Cart View Details

Quadro Model 197 Stainless Steel Cone Mill

Stock #RG9147

Quadro Model 197 Stainless Steel Cone Mill

Stock #RG9147

Used Quadro model 197 stainless steel Cone Mill. Has hopper with approximately 75mm diameter inlet and 95mm diameter outlet. Driven by 1.5 kW 230 volt 3/60 motor with variable speed frequency inverter. Approximately 127mm diameter screens. Mounted on stainless steel...

Location: EU

Add to Cart View Details

Quadro Model 197-S Stainless Steel Cone Mill

Stock #RG9146

Quadro Model 197-S Stainless Steel Cone Mill

Stock #RG9146

Used Quadro model 197-S stainless steel Cone Mill. Has approximately 75mm diameter inlet and 95mm diameter outlet. Driven by approximately 1.5 kW 380 volt 3/50 motor. Includes (2) approximately 127mm diameter screens with 1.3mm & 4mm perforations. Mounted on stainless...

Location: EU

Add to Cart View Details

Quadro Comil Model 196S Stainless Steel Cone Mill

Stock #L1185-13

Quadro Comil Model 196S Stainless Steel Cone Mill

Stock #L1185-13

Used Quadro Comil model 196S stainless steel Cone Mill. Has 2-blade rotor belt driven by 7.5 kW 415 volt 3/50 1450 rpm motor. Includes 305mm diameter screen. Mounted on stainless steel stand on (4) wheels. Includes local controls. Capacity up...

Location: Perry England Warehouse

Add to Cart View Details

Quadro Model U10 Stainless Steel Comil

Stock #V711-37290

Quadro Model U10 Stainless Steel Comil

Stock #V711-37290

Used Quadro model U10 Comil. Stainless steel construction. With beater and screen. Direct coupled 20 HP, 230/460 volt XP motor with VFD controller mounted in XP panel. Mounted in Carlisle life science isolator. Single-sided with (5) glove ports. Approximately 60″...

Location: Midwest USA

Add to Cart View Details

Sorema Extruder

Stock #RG9081

Sorema Extruder

Stock #RG9081

Used Sorema 160mm two stage extruder L/D 33:1, suitable for processing PE, PP, PS. Previously ran with a 250kW AC drive. Typically screw is ran at 100 rpm. Ceramic heater bands with fan assisted cooling on barrel. Feed throat measures...

Location: UK

Add to Cart View Details

Metalchem Torun (Poland) Type PGM/K Stainless Steel Rotor Granulator

Stock #U2176

Metalchem Torun (Poland) Type PGM/K Stainless Steel Rotor Granulator

Stock #U2176

Used vertical rotor granulator made in Metalchem Torun (Poland) type PGM/K. All construction made of stainless steel. Reported output up to 400 kg/h depending on product and size of the screen. Machine is driven by electric motor 2,2 kW motor....

Location: Perry Poland Warehouse

Add to Cart View Details