25-60 HP Granulators

25 HP 12″ X 15″ Nelmor Model G1215M1 Granulator

Stock #6169-3

25 HP 12″ X 15″ Nelmor Model G1215M1 Granulator

Stock #6169-3

Used Nelmor 12″ X 15″ granulator model G1215M1, serial #800515261. Belt driven to 25 HP motor. Includes tray feed hopper, with granulator mounted on drum high discharge. Has 3 steep angle knives mounted on closed rotor. Has .125″ O.D. Screen....

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

25 HP 12″ X 18″ Hydreclaim Model 1218 CTE Small Parts Granulator

Stock #6319-6

25 HP 12″ X 18″ Hydreclaim Model 1218 CTE Small Parts Granulator

Stock #6319-6

Used Hydreclaim model 1218 CTE small parts granulator. Has 12″ X 18″ throat opening with sound enclosed top and side feed hopper. Driven by 25 HP 460 volt motor. Includes blower discharge. Has 2 knife slant cut open rotor and...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

25 HP 14″ X 18″ Rapid Model G18 Granulator

Stock #ZP62202

25 HP 14″ X 18″ Rapid Model G18 Granulator

Stock #ZP62202

Used 14″ X 18″ Rapid model G18 25 HP granulator. Granulator is equipped with infeed conveyor, blower discharge and cyclone. Includes 14″ X 18″ feed throat, 3-knife open rotor with double scissors cut. Has tilt back hopper for interior access...

Location: South USA

Add to Cart View Details

20 HP 16″ x 20″ Nelmor Model G1620 Granulator

Stock #21010-519

20 HP 16″ x 20″ Nelmor Model G1620 Granulator

Stock #21010-519

Used Nelmor Model G1620 granulator. 16″ x 20″ feed throat, 3 knife solid rotor. Driven by a 25 hp 460 volt motor. Mounted on casters. Complete with starter and controls.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

20 HP 16″ x 20″ Nelmor Model G1620 Granulator

Stock #21010-518

20 HP 16″ x 20″ Nelmor Model G1620 Granulator

Stock #21010-518

Used Nelmor Model G1620 granulator, 16″ x 20″ feed throat, 3 knife solid rotor, 2 bed knives. Driven by a 25 hp, 460 volt motor. Mounted on casters. Complete with starter and controls.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

25 HP 16″ X 16″ LR Systems Model SG400 Granulator

Stock #20466-747

25 HP 16″ X 16″ LR Systems Model SG400 Granulator

Stock #20466-747

Used LR systems model SG400 granulator previously used for scrap blow molded bottle recycline. Has 16″ X 16″ throat opening with approximately 25 HP granulator. Includes motor starter and 5 HP blower for discharge. Also includes oversized hopper for accepting...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

25 HP 16″ X 20″ Cumberland Model 1620 Granulator

Stock #20881

25 HP 16″ X 20″ Cumberland Model 1620 Granulator

Stock #20881

Used Cumberland Engineering granulator. New 2011. Model 1620, Serial #CAO8300A-11012. Has 16″ X 20″ feed opening, 3 knife open rotor with scissors cutting action, but no blades included. Driven by approximately 25 hp motor. Includes blower for discharge and cyclone...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

29 HP 11″ X 25″ Alpine Model RO 40/63 Cutter Granulator

Stock #RG6247

29 HP 11″ X 25″ Alpine Model RO 40/63 Cutter Granulator

Stock #RG6247

Used Alpine model RO 40/63 carbon steel cutter granulator. Has 400mm diameter X 630mm wide open (guillotine type) of rotor, unit has 2 rotor knives and 2 Stator knives (1) screens available. Driven by EL. Motor 3PH/50hz/380V/22 kW.

Location: EU

Add to Cart View Details

30 HP 8″ X 16″ Allsteele Grinder

Stock #585-39

30 HP 8″ X 16″ Allsteele Grinder

Stock #585-39

Used 30 HP Allsteele grinder. Has 8″ X 16″ opening with standard tray feed hopper. Grinder is mounted on Gaylord high stand. Includes 30 HP motor direct connected to grinder.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

39 HP 12″ x 24″ Conair Granulator

Stock #6419-3

39 HP 12″ x 24″ Conair Granulator

Stock #6419-3

Used approximately 30 hp Conair granulator supplying approximately 12″ x 24″ feed opening. Includes hopper and 3-knife rotor.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

Stock #20094-17

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

Stock #20094-17

Andritz Sprout-Bauer model DSF1518 granulator, 7-knife rotor, 2 bed knife, 30 HP 460 volt only motor, belt drive, 5″ X 18″ blow-in in-feed hopper, vacuum take-off discharge, mounted on a short leg base, no starter/controls designed for film granulation (3...

Location: Midwest USA

Add to Cart View Details

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

Stock #20094-19

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

Stock #20094-19

Andritz Sprout-Bauer model DSF1518 granulator, 7-knife rotor, 2 bed knife, 30 HP 460 volt only motor, belt drive, 5″ X 18″ blow-in in-feed hopper, vacuum take-off discharge, mounted on a short leg base, no starter/controls designed for film granulation (3...

Location: Midwest USA

Add to Cart View Details

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

Stock #20094-18

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

Stock #20094-18

Andritz Sprout-Bauer model DSF1518 granulator, S/N 2000-00373, 7-knife rotor, 2 bed knife, 30 HP 460 volt only motor, belt drive, 5″ X 18″ blow-in in-feed hopper, vacuum take-off discharge, mounted on a short leg base, no starter/controls designed for film...

Location: Midwest USA

Add to Cart View Details

30 HP 8″ X 22″ Jacketed Chamber Granulator

Stock #U2216-1

30 HP 8″ X 22″ Jacketed Chamber Granulator

Stock #U2216-1

Used carbon steel cutting mill. Polish made. Mill is belt driven by EL. motor 22 kW, 2895 rpm, 220/380V, 50 hz. Feeding inlet has dimensions 610mm x 200mm. Mill has rotor equipped with 5 x 3 knives and 4 rows,...

Location: PL

Add to Cart View Details

40 HP 12″ X 28″ Cumberland Model 1628 Granulator

Stock #620-04

40 HP 12″ X 28″ Cumberland Model 1628 Granulator

Stock #620-04

Used Cumberland model 1628 granulator having a 12″ X 28″ throat opening. 3-knife open rotor is belt driven by approximately a 40 HP motor. Pull rolls on feed hopper. With blower .

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

40 HP 16″ X 28″ Cumberland Model 1628X Granulator

Stock #20848-107

40 HP 16″ X 28″ Cumberland Model 1628X Granulator

Stock #20848-107

Used Cumberland granulator model 1628X, serial #CA083050-05025. New 2005. Driven by a 40 HP, 460 volt AC motor. Designed for blower discharge but no blower included. Includes sound deadening hopper, 3-knife open rotor, dual fly Wheel mounted on rotor and...

Location: On Site at Perry (Hainesport NJ - USA)

Add to Cart View Details

40 HP 24″ x 26″ Foremost Model HLD-7A granulator

Stock #21010-372

40 HP 24″ x 26″ Foremost Model HLD-7A granulator

Stock #21010-372

Used Foremost 24″ x 26″ Model HLD-7A granulator, driven by a 40 hp, 460 volt motor. Includes discharge blower, small cyclone and stand alone control panel. Includes 2-knife open rotor. Rotor is offset for accomodating large parts. Serial #37477.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

50 HP 10″ X 19″ Hydreclaim Dual Chamber Granulator

Stock #9219-06

50 HP 10″ X 19″ Hydreclaim Dual Chamber Granulator

Stock #9219-06

Used Hydreclaim dual chamber granulator. Has 10″ X 19″ feed throat with straight drop hopper. Each chamber, upper and lower, equipped with 50 HP belt driven motor, 230/460 volt. Includes 15 HP blower discharge.

Location: NORTHEAST USA

Add to Cart View Details

50HP Grinder, 14″ x 24″ throat

Stock #21051-80

50HP Grinder, 14″ x 24″ throat

Stock #21051-80

Used 50 hp Granutec granulator, with 14″ x 24″ feed throat. Includes tray feed hopper, 3KN open rotor and cylcone receiver for blower discharge but no blower included.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

50 HP 18″ X 24″ Conair/Martin Model CK-1824 Granulator

Stock #20387

50 HP 18″ X 24″ Conair/Martin Model CK-1824 Granulator

Stock #20387

Used Conair/Martin (Rapid) model CK-1824 granulator, S/N 150.431, 18″ X 24″ feed throat, 5 knife open rotor, 2 bed knife, tangential cutting chamber, 50 HP 460 volt motor, insulated body panels and conveyor in-feed hopper, 6″ left hand airveyor discharge,...

Location: Midwest USA

Add to Cart View Details

50 HP 18″ X 50″ TRIA Model 120-49/TR-NS Granulator

Stock #ZP59750

50 HP 18″ X 50″ TRIA Model 120-49/TR-NS Granulator

Stock #ZP59750

Used TRIA model 120-49/TR-NS granulator. Has nominal 18″ X 50″ feed throat opening but also equipped with 40″ wide steel feed rolls with dancer bar. Has 5-knife rotor, 5/16″ screen, 6″ air veyor discharge and driven 50 HP, 480 volt...

Location: Midwest USA

Add to Cart View Details

50 HP 22″ X 24″ Rotogran Granulator

Stock #ZP57439

50 HP 22″ X 24″ Rotogran Granulator

Stock #ZP57439

Used Rotogran 22″ X 24″ 50 HP granulator, new approximately 1995. Includes blower for pneumatic discharge but no cyclone. Open rotor design with 6 fly and 4 bed blades. Unit completely reconditioned 2007. Includes 600 volt soft starter. 1/2″ screen...

Location: Canada

Add to Cart View Details

50 HP 12″ X 17″ Taylor Stiles Style #12 Hammermill

Stock #M3625J-003

50 HP 12″ X 17″ Taylor Stiles Style #12 Hammermill

Stock #M3625J-003

Used Taylor stiles Hammermill, style #12, having 11″ pull rolls and a 23-blade rotor. 12″ X 17″ throat opening, 5/16″ screen. Outboard bearings with oil mist lubrication system. 3/4 HP pull rolls, 50 HP main motor. 220/440/3/60. Machine #2936. Previously...

Location: NJ

Add to Cart View Details