10 - 20 HP Granulators

1 HP Precision Air Conveyance Corp. Model 78FSP Inline Film Chopper

Stock #ZP60836

1 HP Precision Air Conveyance Corp. Model 78FSP Inline Film Chopper

Stock #ZP60836

Used Precision air conveyance corp. Model 78FSP inline film chopper. S/N PQ-9534F. Equipped with 2 knife open rotor, I bed knife, 4″ diameter inlet and outlet. 1 HP, 115/230/460 volt, 1725 rpm motor. Includes inlet muffler box and disconnect switch....

Location: Midwest USA

Add to Cart View Details

1 HP Precision Air Conveyance Model 78FSP Inline Chopper

Stock #20636-13

1 HP Precision Air Conveyance Model 78FSP Inline Chopper

Stock #20636-13

Unused Precision air conveyance model 78FSP inline chopper, serial #001480B. Has 2-knife rotor, (1) bed knife and (2) 3″ O.D. Flex lines for trim pickup. Driven by a 1 HP 208-230/460 volt, 1725 rpm motor. New 2000.

Location: Midwest USA

Add to Cart View Details

1 HP Precision Air Conveyance Model 78FSP Inline Chopper

Stock #20636-14

1 HP Precision Air Conveyance Model 78FSP Inline Chopper

Stock #20636-14

Unused Precision air conveyance model 78FSP inline chopper, serial #001480a. Has 2-knife rotor, (1) bed knife and (2) 3″ O.D. Flex lines for trim pickup. Driven by a 1 HP 208-230/460 volt, 1725 rpm motor. New 2000.

Location: Midwest USA

Add to Cart View Details

1 HP 8″ X 10″ Nissui Model FNSK-04E Granulator

Stock #ZP58489-6

1 HP 8″ X 10″ Nissui Model FNSK-04E Granulator

Stock #ZP58489-6

Used Nissui model FNSK-04E 1 HP granulator. Has robot infeed, 8″X10″ cutting chamber, S-cutter rotor, D2 bed knives. SCREELESS .20″ granule. On base with locking casters. Airveyor discharge. .75kW 460 volt motor. Starter with start/stop pushbutton controls.

Location: Midwest USA

Add to Cart View Details

1 HP 8″ X 10″ Nissui Model FNSK-04D Granulator

Stock #ZP58489-5

1 HP 8″ X 10″ Nissui Model FNSK-04D Granulator

Stock #ZP58489-5

Used Nissui model FNSK-04D 1 HP granulator. With robot infeed, 8″X10″ cutting chamber, S-cutter rotor, D2 bed knives. Screenless .20″ granule. On base with locking casters. Airveyor discharge. .75 kW 460 volt motor. Starter with start/stop pushbutton controls.

Location: Midwest USA

Add to Cart View Details

1 HP 8″ X 10″ Nissui Model FNSK-04E Granulator

Stock #ZP58489-4

1 HP 8″ X 10″ Nissui Model FNSK-04E Granulator

Stock #ZP58489-4

Used Nissui model FNSK-04E 1 HP granulator. Has robot infeed, 8″X10″ cutting chamber, S-cutter rotor, D2 bed knives. Screenless .20″ granule screen. Base has locking casters. Airveyor discharge .75 kW 460 volt motor. Starter with start/stop pushbutton controls.

Location: Midwest USA

Add to Cart View Details

1 HP 8″ X 10″ Nissui Granulator

Stock #ZP58489-8

1 HP 8″ X 10″ Nissui Granulator

Stock #ZP58489-8

Used Nissui 1 HP granulator. Has robot infeed, 8″X11″ cutting chamber, S-cutter rotor, D2 bed knives. Screenless, on casters, bin discharge. .75 kW 230/460 volt motor. Has starter with start/stop pushbutton controls.

Location: Midwest USA

Add to Cart View Details

1 HP 8″ X 10″ Nissui Granulator

Stock #ZP58489-7

1 HP 8″ X 10″ Nissui Granulator

Stock #ZP58489-7

Used Nissui 8″ X 11″ 1 HP granulator. Has robot infeed, 8″X11″ cutting chamber, S-cutter rotor, D2 bed knives. Screenless. On casters. Bin discharge. .75 kW 230/460 volt motor. Starter with start/stop pushbutton controls.

Location: Midwest USA

Add to Cart View Details

2 HP 10″ X 11″ Nissui Granulator

Stock #ZP58489-10

2 HP 10″ X 11″ Nissui Granulator

Stock #ZP58489-10

Used Nissui 10″ X 11″ 2 HP granulator. Has robot infeed, 10″X11″ cutting chamber, S-cutter rotor, D2 bed knives. Screenless. On casters. Bin discharge. 1.5 kW 230/460 volt motor. Starter with start/sop pushbutton controls.

Location: Midwest USA

Add to Cart View Details

2 HP 22″ X 22″ Nissui Model SA-34 Granulator

Stock #ZP58489-12

2 HP 22″ X 22″ Nissui Model SA-34 Granulator

Stock #ZP58489-12

Used Nissui 2 HP model SA-34 granulator. 22″ X 22″ robot infeed, 11″X11″ cutting chamber, S-cutter rotor, D2 bed knives. Screenless. Mounted on casters. Airveyor discharge. 1.5 kW 460 volt motor. Starter with start/stop pushbutton controls.

Location: Midwest USA

Add to Cart View Details

4 HP CONDUXCutting Mill/Granulator

Stock #HG62116

4 HP CONDUXCutting Mill/Granulator

Stock #HG62116

Used CONDUX type CS 230/220 – 03 carbon steel cutting Mill/granulator. Has 230 mm diameter X 220 mm wide open rotor with (3) rotor knives and (4) Stator knives. Rotor belt driven 3PH/380V/4kW EL. Motor AEG.

Location: CZ

Add to Cart View Details

4 HP 6″ X 6″ Svit 150/150 Cutting Mill/Granulator

Stock #H2036-V

4 HP 6″ X 6″ Svit 150/150 Cutting Mill/Granulator

Stock #H2036-V

Used SVIT (Czech republic) 150/150 carbon steel pilot size cutting Mill/granulator. Has approximately 150 mm diameter X 150 mm wide solid rotor with (3) rotor knives and (2) Stator knives, straight cut. Mounted bottom screen with the hole size 2...

Location: CZ

Add to Cart View Details

5 HP 7″ X 10″ Mecanofil Cutter

Stock #U2085-10

5 HP 7″ X 10″ Mecanofil Cutter

Stock #U2085-10

Used carbon steel cutter for plastics made by Mecanofil (Spain) with feeder screw conveyor. Screw feeder conveyor driven by 0,55 kW motor via bevel gearbox. Grinding chamber dimnesions: length 250 mm x diameter 170 mm. Has 2 static blades and...

Location: Perry Poland Warehouse

Add to Cart View Details

5 HP 8″ X 8″ Polymer Systems Model HM-W88 Hot Melt Granulator

Stock #M2813J-006

5 HP 8″ X 8″ Polymer Systems Model HM-W88 Hot Melt Granulator

Stock #M2813J-006

Used polymer systems model HM-W88 hot melt granulator having an 8″ X 8″ throat opening with a 2-knife open rotor. Granulator has a 2-1/2″ X 8″ top feed opening and a jacketed cutting chamber. Unit is driven by a 5...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

5 HP 8″ X 10″ Nelmor Model 810RGII Plastics Granulator

Stock #C9101J-004

5 HP 8″ X 10″ Nelmor Model 810RGII Plastics Granulator

Stock #C9101J-004

Used Nelmor model 810RGII plastics granulator having an 8″ X 10″ throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor. Unit is factory sound enclosed and is set up for veyor discharge. Hopper...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

5 HP 8″ X 10″ Nelmor Model 810RGII Plastics Granulator

Stock #C9101J-002

5 HP 8″ X 10″ Nelmor Model 810RGII Plastics Granulator

Stock #C9101J-002

Used Nelmor model 810RGII plastics granulator having an 8″ X 10″ throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor. Unit is factory sound enclosed and is set up for veyor discharge. Hopper...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

5 HP 8″ X 10″ Nelmor Model 810RGII Plastics Granulator

Stock #C9101J-003

5 HP 8″ X 10″ Nelmor Model 810RGII Plastics Granulator

Stock #C9101J-003

Used Nelmor model 810RGII plastics granulator having an 8″ X 10″ throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor. Unit is factory sound enclosed, and is set up for veyor discharge. Hopper...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

5 HP 10″ X 5″ Plastic Cutter

Stock #U2094-3

5 HP 10″ X 5″ Plastic Cutter

Stock #U2094-3

Used vertical plastic cutter polish made. Machine is driven by electric motor with power 4 kW, 1440 rpm, 50 HZ , 220/380V. Inlet dimensions: width 270 mm x 140 mm height. Milling chamber has a internal diameter 275 mm. Rotor...

Location: Perry Poland Warehouse

Add to Cart View Details

5 HP 10″ X 5″ Plastic Cutter

Stock #U2143-14

5 HP 10″ X 5″ Plastic Cutter

Stock #U2143-14

Used vertical plastic cutter polish made. Machine is driven by electric motor with power 4 kW, 1440 rpm, 50 HZ , 220/380V. Inlet dimensions: width 270 mm x 140 mm height. Milling chamber has a internal diameter 275 mm. Rotor...

Location: Perry Poland Warehouse

Add to Cart View Details

7 HP 8″ X 10″ Ball & Jewell Model HD-810-4 Portable Granulator

Stock #8488-9

7 HP 8″ X 10″ Ball & Jewell Model HD-810-4 Portable Granulator

Stock #8488-9

Used Ball & Jewell model HD-810-4 portable granulator having an 8″ X 10″ throat opening. Includes tray feed hopper and profile chute. Three knife open rotor is belt driven by a 7.5 HP motor. Bin discharge. S/N 5489-92469.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

7 HP 10″ X 10″ Amacoil Model HMG Granulator

Stock #U1903-7

7 HP 10″ X 10″ Amacoil Model HMG Granulator

Stock #U1903-7

Used Amacoil granulator type HMG having a 254 mm X 254 mm (10″X10″) throat opening. Rotor has 4 knives and is driven by 5.5 kW motor. Designed for air veyor discharge, but presently missing chute.

Location: Perry Poland Warehouse

Add to Cart View Details

7 HP 10″ X 12″ Nelmor Model RG1012P1 Granulator

Stock #ZP61645

7 HP 10″ X 12″ Nelmor Model RG1012P1 Granulator

Stock #ZP61645

Used Nelmor granulator model no. RG1012P1 7.5 HP motor, 460 volt in feed: tray feed with 6″ X 6″ right hand profile chute cutting chamber: 10″ X 12″ rotor: 3 knife micro bed knives: D2 screen: 5/16″ diameter base: on...

Location: Midwest USA

Add to Cart View Details

10 HP 2″ X 30″ Wortex Under-The-Press Granulator

Stock #20232-65

10 HP 2″ X 30″ Wortex Under-The-Press Granulator

Stock #20232-65

Used 30″ wide Wortex under-the-press granulator equipped with approximately 10 HP motor. Package includes paddle/pull roll assembly, low veyor grinder base for ease of installing under thermoformer trim press.

Location: West Coast USA

Add to Cart View Details

10 HP 2″ X 30″ Wortex Under-The-Press Granulator

Stock #20232-67

10 HP 2″ X 30″ Wortex Under-The-Press Granulator

Stock #20232-67

Used 30″ wide Wortex under-the-press granulator equipped with approximately 10 HP motor. Package includes paddle/pull roll assembly, low veyor grinder base for ease of installing under thermoformer trim press.

Location: West Coast USA

Add to Cart View Details

10 HP Cumberland Model 284 Granulator

Stock #20814-13

10 HP Cumberland Model 284 Granulator

Stock #20814-13

Used Cumberland model 284 granulator with approximately 10 HP motor. Includes tray feed hopper auxiliary nip roll assembly. Has 3-knife open rotor. New 1980. Serial #325525-80214.

Location: Perry New Jersey Warehouse

Add to Cart View Details

10 HP 10″ X 12″ Nelmor Model G1012MI Granulator

Stock #ZP61644

10 HP 10″ X 12″ Nelmor Model G1012MI Granulator

Stock #ZP61644

Used Nelmor granulator (rebuilt) model no. G1012mi 10 HP motor, 460 volt in feed: tray feed cutting chamber: 10″ X 12″ W/ hard-facing rotor: 3 knife solid micro knife bed knives: D2 screen: 5/16″ diameter base: on casters discharge: bin...

Location: Midwest USA

Add to Cart View Details

10 HP 10″ X 12″ Nelmor G1012M1 Granulator

Stock #ZP61149

10 HP 10″ X 12″ Nelmor G1012M1 Granulator

Stock #ZP61149

Used Nelmor G1012M1 granulator having a 10″ X 12″ throat opening. Has D2 bed knives and 2-knife open knife rotor. Rotor is driven by 10 HP motor, 460 volt. Infeed from a double wall tray feed. Granulator includes 5/16″ diameter...

Location: Midwest USA

Add to Cart View Details

10 HP 12″ X 7″ Plastic Cutter

Stock #U2143-13

10 HP 12″ X 7″ Plastic Cutter

Stock #U2143-13

Used vertical plastic cutter polish made. Machine is driven by electric motor with power 7,5 kW. Inlet dimensions: width 300 mm x 180 mm height. Rotor has 3 knives. On milling chamber walls are mounted 4 static knives. Milling chamber...

Location: Perry Poland Warehouse

Add to Cart View Details

10 HP 12″X9″ PROCESS CONTROL EDGE TRIM GRIND

Stock #820-252

10 HP 12″X9″ PROCESS CONTROL EDGE TRIM GRIND

Stock #820-252

Used Process Control Model PC10G0, 10HP edge trim film grinder with approximately 12″ x 9″ feed opening. Includes operator control panel, belt driven to 10hp motor and with blower discharger. Also includes 80″ high hopper for film edge trim collection....

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

14 HP Plastic Granulator

Stock #AG60898-04

14 HP Plastic Granulator

Stock #AG60898-04

Used plastic granulator with a 2 fixed knives and 3 mobile knives at rotor. Diameter of rotor 320mm,and length of rotor 400mm. Rotation speed of rotor 550 rpm. Rotor is belt driven by approximately a 15 HP/11 kW motor. Loading...

Location: UKRAINE

Add to Cart View Details

15 HP 11″ X 14″ Formost Granulator

Stock #561-21

15 HP 11″ X 14″ Formost Granulator

Stock #561-21

Used Foremost plastic granulator having approximately an 11″ X 14″ throat opening with a 2-knife semi-open rotor. Rotor is belt driven by approximately a 15 HP motor. Pelican type hopper. With motor starter and push buttons.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

15 HP 11″ X 14″ Formost Granulator

Stock #561-20

15 HP 11″ X 14″ Formost Granulator

Stock #561-20

Used Foremost plastic granulator having approximately an 11″ X 14″ throat opening with a 2-knife semi-open rotor. Rotor is belt driven by approximately a 15 HP motor. Pelican type hopper. With motor starter and push buttons.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

15 HP 12″ X 16″ Pre-Crusher

Stock #U2143-9

15 HP 12″ X 16″ Pre-Crusher

Stock #U2143-9

Used vertical pre-crusher for plastics. Polish made. Machine has a milling chamber with internal diameter 500 mm. At the bottom of milling chamber there is a rotor with two blades. Rotor is belt driven by electric motor 11 kW, 1460...

Location: PL

Add to Cart View Details

15 HP 14″ X 20″ Cumberland Model 584 Granulator

Stock #20351-2

15 HP 14″ X 20″ Cumberland Model 584 Granulator

Stock #20351-2

Used Cumberland model 584 granulator, S/N 335000-7670, 14″ X 20″ feed throat, 3 knife slant cut open rotor, 2 bed knife, approximate 15 HP 460 volt motor, insulated tray feed hopper with rear mounted 14.5″ trumpet feed roll in-feed, smooth...

Location: Midwest USA

Add to Cart View Details

20 HP RML Commander Model TS1-SH-16-316-20 Scrap Grinder

Stock #20724-5

20 HP RML Commander Model TS1-SH-16-316-20 Scrap Grinder

Stock #20724-5

Used RML Commander scrap grinder, model TS1-SH-16-316-20. Staggered blade rotor. Driven by a 20 HP 3/60/575 volt, 1170 rpm motor. Set up for blower discharge. Includes 5 HP blower. Mounted on a carbon steel frame.

Location: Midwest USA

Add to Cart View Details

20 HP 48″ Wortex Model UP755 Under The Press Granulator.

Stock #20900-3

20 HP 48″ Wortex Model UP755 Under The Press Granulator.

Stock #20900-3

Used 20 hp Wortex model UP755 Under-The-Press granulator. Has 48″ hopper opening, grinder driven with paddle roll nip roll feed. Grinder is driven by a 20 hp motor and includes 5 hp blower for discharge. Granulator is portable, mounted on...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

20 HP Rapid Model 1018-K Granulator

Stock #20815

20 HP Rapid Model 1018-K Granulator

Stock #20815

Used Rapid granulator model 1018-K. Has 3 knife, scissors cut, open rotor & 3/8″ discharge screen. Includes collection bin for ground material. No blower included. Grinder is driven by a 20 HP motor, 230/460 volt. Has 10″ X 18″ feed...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

20 HP 12″ X 10″ Vertical Cutter

Stock #U2025-1

20 HP 12″ X 10″ Vertical Cutter

Stock #U2025-1

Used vertical cutter for plastics, polish made. Machine has inlet with dimensions 315 mm x 260 mm and is driven by electric motor 15 kW. Milling chamber has diameter 450 mm and height 120 mm. Rotor has 3 bolted knives....

Location: Perry Poland Warehouse

Add to Cart View Details

20 HP 12″ X 30″ MPG Service & Sales Model GP-1230HB Granulator

Stock #20701-29

20 HP 12″ X 30″ MPG Service & Sales Model GP-1230HB Granulator

Stock #20701-29

Used MPG Service & Sales granulator, Model GP-1230HB. 12″ X 30″ feed with tilt back pelican style feed hopper, (3) bolt-on blades open rotor, (1) bed knife. Approximately 7/16″ size screen holes. Set up for blower discharge with a 10...

Location: Midwest USA

Add to Cart View Details

20HP Cumberland Model 484 Granulator

Stock #20864-388

20HP Cumberland Model 484 Granulator

Stock #20864-388

Used Cumberland model 484 granulator with 14″ X 16″ feed opening. Has 3-knife open rotor with Chevron blade configuration, insulated tray feed hopper, serial #521000-7914. Includes blower and starter. Manufactured 1979.

Location: On Site at Perry (Hainesport NJ - USA)

Add to Cart View Details

20 HP 14″X16″ NELMOR W/BLOWER SOUND ENCLOSED

Stock #820-257

20 HP 14″X16″ NELMOR W/BLOWER SOUND ENCLOSED

Stock #820-257

Used Nelmor granulator with approximately 20hp motor. 14″ x 16″ feed opening. Has blower discharge, operator control panel, serial # 30280. 460 volt 3 ph, 60 Hz. Includes edge trim receiver for installation on top of a standard tray feed...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

20 HP 14″ X 20″ Cumberland Model 5 Granulator

Stock #8051-8

20 HP 14″ X 20″ Cumberland Model 5 Granulator

Stock #8051-8

Used Cumberland model #5, 14″ X 20″ granulator. No hopper included. Has 3-knife open rotor, new 1965. Granulator is mounted on bin high stand with airvayor bottom hopper. Serial # 35055-6537.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

24 HP 24″ X 18″ Alpine Model 30/60 RO Cutting Mill/Granulator

Stock #HG59607

24 HP 24″ X 18″ Alpine Model 30/60 RO Cutting Mill/Granulator

Stock #HG59607

Used Alpine model 30/60 RO carbon steel cutting Mill/granulator. Has 600 mm diameter X 450 mm wide open rotor with (4) rotor knives and (2) Stator knives, inclined cut. The machine has an integrated ventilator. Rotor belt driven 3PH/380V/18,5kW EL....

Location: CZ

Add to Cart View Details