Perry Videx: 25 Hainesport-Mt Laurel Road, Hainesport, NJ 08036, USA. +1 609 267 1600
Fire Tube Package Boilers (9)
Water Tube Package Boilers (55)
Hot Oil Boilers (2)
Electric Boilers (4)
Diesel Generators 50 HZ (8)
Diesel Generators 60 HZ (18)
Gas Turbine Generators (27)
Steam Turbine Generators Condensing (19)
Steam Turbine Generators Non Condensing (19)
Cogeneration Plants (34)
Gen Ends (2)
Baler (10)
Coating Equipment (8)
Coating Equipment Accessories (4)
Embosser (3)
Hot Stamp Printing Machinery (1)
Laminator (6)
Offset Printing Machines (1)
Printing Press Accessory (1)
Sheet Fed Printing Machine (2)
Sheeters (10)
Slitter - Rewinders (100" or larger) (1)
Slitter Rewinders 0" to 49" (1)
Slitter Rewinders 50" to 99" (7)
Tissue & Towel Converting (6)
Unwinds (11)
Web Type Printing Machinery (5)
Clarifiers (7)
Dewatering Belt Presses (11)
Disc Filters (9)
Screw Presses (30)
Water Treatment Deionizer (6)
Water Treatment Demineralizer (4)
Atmospheric Tray Dryers (10)
Batch Fluid Bed Dryers (46)
Conical Rotary Vacuum Dryers (33)
Continuous Fluid Bed Dryers (9)
Conveyor Dryer (3)
Double Drum Dryers (3)
Flash Dryer (3)
Other Dryers (1)
Pan Dryers (6)
Rotadisc Dryer (3)
Rotary Hot Air Dryers (11)
Rotary Kiln Dryer (4)
Rotary Multi-Pass Dryers (Heil Type) (1)
Rotary Steam Tube Dryer (3)
Rotary Tray Dryers (5)
Rotary Vacuum Dryers (31)
Sandvik Type Belt Conveyor Dryers (3)
Shelf Freeze Dryer (17)
Single Drum Dryers (6)
Spray Dryers (18)
Wire Jacketing Machinery (4)
Co-Rotating Twin Screw Extruders (18)
Counter-Rotating Twin Screw Extruders (2)
Extruder Screws (12)
Extruder Temperature Panels (10)
Rubber Extruders (3)
Extrusion Line Feeders (8)
1 1/2" Extruders (11)
2 1/2" Extruders (9)
3 1/2" Extruders (10)
4 1/2" Extruders (6)
6" Extruders (1)
8" Extruders (4)
Air Rings (10)
Blown Film Dies (26)
Blown Film Lines (6)
Blown Film Nip Rolls (5)
Cast Film Lines (18)
Extruder Line Fiber Filament (1)
Extruder Line Pipe Mics. (9)
Extruder Plastic Co-Ex Block (9)
Extrusion Dies (19)
Extrusion Dryers (28)
Film Treater Stations (11)
Pipe and Profile Downstream (7)
Screen Changers (30)
Sheet Dies (53)
Sheet Extrusion Lines (21)
Winders Plastic Film (10)
Cartridge Filters (58)
Filter Parts (1)
Nutsche Filters (24)
Osmosis and Membrane Filters (19)
Plate & Frame Filter Presses (51)
Plate & Frame Filter Presses Europe (30)
Pressure Leaf Filters 1 to 199 Sq Ft (21)
Pressure Leaf Filters 200 Sq Ft & Up (7)
Pressure Leaf Filters Europe (18)
Rotary Disc Filters (2)
Rotary Drum Filters (6)
Rotary Drum Filters Europe (7)
Vacuum Belt Filters (6)
10 to 20 HP Granulators (29)
25 to 60 HP Granulators (16)
75 to 200 HP Granulators (12)
Cutter Film Densifier (5)
Cutter Guillotine (4)
Cutter, Dicer - Plastic & Rubber (3)
Cutters & Shredders (25)
Granulator Parts (7)
Pelletizer Parts (2)
Strand Pelletizers (20)
Underwater Pelletizers (7)
Air Cooled Heat Exchangers (2)
Karbate Heat Exchangers (35)
Karbate Heat Exchangers Europe (5)
Plate Heat Exchangers (29)
Plate Heat Exchangers Europe (13)
Scraped Surface Heat Exchangers (6)
Shell and Tube Heat Exchangers 0 to 399 Sq Ft (71)
Shell and Tube Heat Exchangers 400 to 999 Sq Ft (18)
Shell and Tube Heat Exchangers Over 1000 Sq Ft (71)
Shell and Tube Heat Exchangers Europe 0 to 49 Sq Mt (28)
Shell and Tube Heat Exchangers Europe Over 50 Sq Mt (7)
New Shell and Tube Heat Exchangers (3)
Carbon Steel Shell and Tube Heat Exchangers (20)
Spiral Heat Exchangers (28)
Spiral Heat Exchangers Europe (2)
Miscellaneous Tubular Heat Exchangers (5)
Batch Ball Mills (10)
Colloid Mills (22)
Compactors and Chilsonators (11)
Cracking Mills (7)
Fitzmills (26)
Fluid Energy and Jet Mills (21)
Granulator, Drug Mill & Oscillating Mills (36)
Hammer Mills (27)
Hammer Mills Europe (12)
Impact Mill (2)
Media Mills (50)
Mikro Pulverizer Type Mills (10)
Mill Miscellaneous (54)
Pellet Mills (11)
Pelletizer Pan (2)
Raymond Roller Mills (1)
Rietz Type Disintegrator Mills (6)
Roll Mills 2, 3 or More Rolls (8)
Roll Mills for Plastic & Rubber Industries (10)
Vacuum Extruder Pug Mills (3)
Banbury Type Mixers (11)
Continuous Mixer Accessories (1)
Continuous Mixers (7)
Dispersion Mixers (17)
Dispersion Mixers Europe (52)
Double Arm Mixers (33)
High Intensity Mixer Parts (17)
High Intensity Mixers (61)
Intensive Pharma Mixers (25)
Intensive Turbulizer Mixers (1)
Miscellaneous Powder Mixers (5)
Mixer Miscellaneous (18)
Nauta Mixers (58)
Planetary Mixers (82)
Plowshare Mixers (52)
Ribbon Mixers (43)
Ribbon Mixers Europe (45)
Tumbling Mixers (86)
Underdriven Dispersion Mixers (5)
10 to 100 Ton Injection Molders (8)
100 to 200 Ton Injection Molders (3)
200 to 400 Ton Injection Molders (6)
400 to 600 Ton Injection Molders (2)
600 to 2000 Ton Injection Molders (2)
Blow Molders (17)
Blow Molding Molds (8)
Industrial Blow Molders (3)
Injection Molds (2)
Polyurethane Foam Molders (2)
Rotary Table Insert Molders (3)
Rubber Injection Molders (1)
Calenders (5)
Digesters, (Paper) (3)
Headboxes (4)
Miscellaneous Paper Machine Parts (11)
Miscellaneous Paper Machinery (5)
Paper Dryers (2)
Paper Lab & Pilot Equipment (1)
Paper Machine Rolls (4)
Paper Machines 100" to 157" (2.51 to 4.0 meter) (6)
Paper Machines Over 157" (4.0 meter) (4)
Paper Machines, Smaller than 98" (2.5 meter) (2)
Paper Mills (5)
Paper Roll & Bale Handling & Wrapping (2)
Paper Super Calenders (1)
Reels (2)
Tissue Machines (7)
Woodroom & Woodyard (Paper) (1)
Yankee Dryers (4)
Agricultural Chemicals Plants (5)
Air Separation Plants for Oxygen, Nitrogen & Hydrogen (19)
Biorefining Plants (9)
Brewery, Distillery & Alcohol Plants (10)
Dairy Milk Ice Cream Plants (4)
Edible Oil Plants (19)
Food Manufacturing Plants (42)
Industrial Inorganic Chemicals Plants (7)
Industrial Organic Chemicals Plants (7)
Mineral Processing, Mining, Cement Plants (9)
Miscellaneous Process Plants (32)
Petrochemical, Refinery, Asphalt Plants (6)
Pharmaceutical Plants (3)
Plastic Materials, Synthetic Resins and Rubber, Manmade Fibers Plants (7)
Plastic Rubber Plants (5)
Soap, Detergents, Cleaning Preparations, Cosmetics Plants (3)
Stainless Steel Reactors Less than 500 Gallons (91)
Stainless Steel Reactors 500 to 2000 Gallons (13)
Stainless Steel Reactors 2000 Gallons and Up (4)
Reactor Parts - Agitators (6)
Reactor Parts - Agitator Drives (86)
Glass Lined Reactors (82)
Glass Lined Agitators (199)
Glass Lined Baffles (178)
Glass Lined Covers (184)
Glass Lined Drives (101)
Glass Lined Reactor Parts (36)
Carbon Steel Reactors (1)
Stainless Steel Reactors - Europe Less than 5000 Litres (61)
Stainless Steel Reactors - Europe 5,000-19,999 Litres (23)
Stainless Steel Reactors - Europe More than 20000 Litres (5)
Glass Lined Reactors, Europe Less than 5,000 Litres (45)
Glass Lined Reactors Europe 5,000 Litres and Up (15)
Aluminum Tanks (5)
Cryogenic Tanks (3)
Freezer (1)
Miscellaneous Lined Tanks (29)
Tank Sphere (1)
Stainless Steel Tanks Less than 1,000 Gallons (149)
Stainless Steel Tanks 1000 to 1999 Gallons (33)
Stainless Steel Tanks 2,000 to 3,999 Gallons (29)
Stainless Steel Tanks 4,000 to 5,999 Gallons (17)
Stainless Steel Tanks 6,000 to 9,999 Gallons (31)
Stainless Steel Tanks 10,000 to 19,999 Gallons (14)
Stainless Steel Tanks 20,000 Gallons and Up (3)
Glass Lined Tanks (52)
Steel Tanks Less than 10,000 Gallons (9)
Steel Tanks 10,000 Gallons and Up (4)
Stainless Steel Tanks in Europe Less than 5,000 Litres (391)
Stainless Steel Tanks in Europe 5,000 to 9,999 Litres (29)
Stainless Steel Tanks in Europe 10,000 to 19,999 Litres (32)
Stainless Steel Tanks in Europe Over 20,000 Litres (45)
Glass Lined Tanks Europe (13)
Home » Filters » Plate & Frame Filter Presses
We've listed our inventory of used Plate & Frame Filter Presses, by size or manufacturer. Most of our Plate & Frame Filter Presses are available for immediate delivery and all are competitively priced. To see more information about the Plate & Frame Filter Presses, click on the stock number.
Stock #20460-04
Used Shriver carbon steel plate and frame filter press. (12) chambers. Hand closure. Size 12.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #9283-05
Used Sperry 12″ X 12″ stainless steel plate and frame filter press. (9) chambers. 1″ frames, 4 eye on base. Hand wheel closure.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #ZG62888
Used 16″ X 16″ Plate and Frame Filter Press. Manufacturer: Ertel. Material: 304 Stainless Steel. With (14) plates 3/8″ tick and (14) frames 1/2″ thick. Sanitary feed lines, 304SS pan. Mounted on a movable cart with casters. With operational paperwork,...
Location: South USA
Stock #21327V-05
Used 16″ X 16″ Ertel filter press From a distillery Nickel Plated, bronze plates (10 plates) Hand bracket closure
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21327V-07
Used 16″ X 16″ Ertel filter press From a distillery Nickel Plated, bronze plates (28 plates) Hand bracket closure
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #20033-01
Used Industrial Filter model I-R 5/8-2.1 4.0 filter press. 58 square foot filtration surface area. (26) 18.5″ X 18.5″ polypropylene plates. Hydraulic closure.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #8234-05
Used Netzsch 18″ X 18″ polypropylene plate and frame filter press. 4 eye (17) 1″ thick plates, (18) 1″ thick frames. Hand hydraulic assist closure.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #825-38
Used 18″ x 18″ Plate and Frame Filter Press (19) chambers Polypropylene construction
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #825-100
Used 18″ x 18″ Plate and Frame Filter Press (13) Klico plates On wheels
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #ZG62038
Used 600 cubic foot filter press. (158) chambers, 2000mm X 2000mm, non-gasketed. 50000# cake weight. 100 psi. Equipped with cloth washers.
Location: Midwest USA
Stock #21218-02
Used 24″ X 24″ Eimco Plate Filter Press Model: M630FB Serial: 42121-01-A Max. filtering pressure: 220 psi Max. thurst: 65 tons Max. oil pressure: 4600 psi Approximately 48 square feet filtration area (12) plates
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #2932-07
Used Artisan model 65 “dynamic thickener/washer” filtration unit. 65 square foot. 316 stainless steel wetted parts. 50 HP drive 3/60/230/460V 1770 rpm through Morse gear reducer. Rated 400 psig @ 200°F. New 1976, SN 48447, NB# 1409.
Location: Northeast USA
Stock #572-15
Used Eimco Shriver 24 X 24 filter press. Size M630. (8) chambers, (16) polypropylene plate and frames. 4 eye. 100 psi. Air operated hydraulics.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #8958-08
Used Eimco Shriver 24″ X 24″ polypropylene filter press. Size M630FB. (10) chamber plate and frame. Rated 60 psi hydraulic closure with air assist.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #16583-14
Used frames for Sperry 24″ X 24″ filter press. Polypropylene construction.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #9430-01
Used Netzsch 24″ X 24″ model 630 recessed polypropylene filter press. (29) chambers, center feed, open discharge. Plate shifter, hydraulic assist closure. Expandable.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #20460-03
Used Shriver carbon steel filter press frame. Hand hydraulic closure. Size 24. Includes (11) Perrin plates.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #20304-02
Used Sperry 24″ diameter x 24″ long cast iron plate and frame filter press frame only.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #8464-03
Used Sperry 24″ X 24″ type AHCP recessed filter press. Size 24. 100 psi. (20) plates.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21454-1
Used 24″ x 24″ Sperry plate filter press Model: HCP 3 Max filtering pressure: 100 PSI 37 recessed polypro plates for 148 sq.ft. filtering area
Location: South USA
Stock #21454-2
Used Sperry plate and frame filter press Model: HCP 3 Max filtering pressure: 100 PSI 148 sq.ft. filtering area 37 recessed Polypro plates
Location: South USA
Stock #21218-01
Used 24″ x 24″ Eimco Plate Filter Press Model: M630FB Serial: 42087-01-AR Max. filtering pressure: 225 psi Max. thrust: 65 tons Max. oil pressure: 4600 psi Approximately 48 square feet filtration area (12) plates
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #825-50
Used 24″ x 24″ Plate and Frame Filter Press Shop Order: D-00547 Polypropylene construction (15) plates Hydraulic closure
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #825-51
Used 24″ x 24″ Plate and Frame Filter Press Shop Order: D-00312 Polypropylene construction (15) plates Hydraulic closure
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #825-63
Used 24″ x 24″ Recess Plate gasketed Polypropylene Filter Press, 4 eye Manufacturer: K-S Avery Model: 630/100RC/KF22/25 Serial #: AF 0256 Job: 1-2411 Hydraulic operating pressure: 3500 psi Max. feed pressure: 100 psi 22 plates
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #8607V-5
Used Hoesch model 800-2273-D1-576 PP/D-20-D filter press. (22) 30″ X 30″ polypropylene membrane plates. Rated 225 psi @ 100°. 13 cubic foot cake capacity. 4-eye, center feed. Equipped with hydraulic assist closure. Serial #0704.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #8607V-6
Used Hoesch polypropylene filter press. 30″ X 30″ (26) chambers plate and frames. Rated 15 bar with hydraulic closure. Model M30-171-D-157-PP.20. Serial #0675.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #315-317
Used Independent 30″ X 30″ plate and frame filter press. Polypropylene plates and frames – (11) 4-eye closed delivery plates plus adapter plate for approximately 96 square foot filtration area, and (9) 2″ wide frames for approximately 5.9 cubic foot...
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #4772
Used 30″ X 30″ polypropylene plates and frames. 4 eye, closed delivery. (48) 2″ thick frames and (48) 1″ thick plates. Approximately 504 square foot filtration area, 42 cubic foot cake capacity.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #740V-6553
Used Duriron 268 square foot polypropylene plate and frame filter press. (39) 31.5″ X 31.5″ X 2.5″ thick plates. (4) holes – (1) 1/2″ and (1) 4″ center hole. With hydraulic plate shifter.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #9988-07
Used Netzsch filter press with plate shifter. (69) 800mm polypropylene plates, 2.125″ thick. Single eye. Hydraulic closure with hydraulic power pack. Open discharge
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #8523-14
Used 31″ X 31″ polypropylene recessed filter press. 10 chambers, 4-eye closed delivery. Air/hydraulic closure with diaphragm pump. Battery operated team closure. Rated 100 psi. Expandable to 20 chambers, approximately 100 square foot filter area. 5.7 cubic foot cake capacity....
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #6308
Used polypropylene filter plates for EP800 filter press. Encompassing (29) chamber plates, (1) tail plate, and (1) head plate. Measuring approximately 32″ X 32″. Manufactured by Duriron.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #9314
Used Micronics 32″ X 32″ recessed (1/2″), center feed, open discharge polypropylene filter press. (80) plates. 5 HP hydraulic pump 3/60/208-230-460 volt. Pump pressure 4500 psi.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #853V-06
Used Perrin 882 square foot filter press (72) 42″ X 42″ polypropylene plates GTE manual valve
Location: Northeast USA
Stock #346-4APL
(1) Lot of used 42″ X 42″ polypropylene plates and frames.
Location: Northeast USA
Stock #15999-235
Used (35) polypropylene 42″ X 42″ recessed filter press plates. Approximately 800 square foot filtration area, 15 cubic foot cake capacity. 1/2″ deep recess. Was previously suspended mounted. Requires mounting brackets.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #853V-07
Used Shriver 882 square foot filter press Size 60/55 (72) 42″ X 42″ polypropylene plates 50 psi Built 2004
Location: Northeast USA
Stock #853V-01
Used Sperry 1666 square foot filter press Size 42 Type AHOP 47-48-49 Maximum pressure 100 psi (136) 42″ X 42″ polypropylene plates Carbon steel frame Control panel
Location: Northeast USA
Stock #346-8
Used approximately 42″ X 42″ polypropylene filter press. (36) chambers. Approximately 800 square foot surface area. 4 eye closed delivery. 2″ frames. Hand hydraulic closure.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #20897
12 Unused Micronics JVK 14387 membrane 1200mm x 1200mm polypropylene/rubber membrane, 3 5/8″ thick, 4-eye delivery plates. $650.00 each 14 Unused Micronics JVK 15033 membrane 1200mm x 1200mm polypropylene/rubber membrane, 3 5/8″ thick, 4-eye delivery plates. $650.00 each 45 Unused...
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #9988-09
Used filter press. (62) 1200mm polypropylene recessed Lenser plates. 4-eye. Shriver skeleton. Hydraulic closure.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #9988-08
Used filter press. (62) 1200mm polypropylene recessed Lenser plates. 4-eye. Shriver skeleton. Hydraulic closure.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #5708-2
Used Lenser 48″ X 48″ polypropylene filter press plates, 4-eye closed delivery. (81) plates for approximately 2300 square foot filtration area.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #5708-1
Used Lenser 48″ X 48″ polypropylene recessed filter press plates. 4-eye closed delivery. Approximately 1/2″ deep recess. (239) plates available, 7500 square foot filtration area.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #8903V-01
Used Perrin model 100-48 polypropylene filter press. 48 X 48 X 2 plates. 1200mm X (40) chambers. 100 psi operating pressure. 992 square foot filter area, 1488 square foot expanded. 54.8 cubic foot cake capacity, 82.2 cubic foot expanded. 1.5″...
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #8722
Used Dryvac membrane filter press frame. Was designed for approximately 3500 square foot filtration area. 295 cubic foot cake capacity. (143) 4-eye, 1500mm X 1500mm polypropylene plates. Plate shifter, control panel, hydraulic drive, water manifold.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #ZG62794
Used 60″ x 60″ Flow Press Plate/Frame Filter Press Manufacturer: Flow Press Model: 1500-60 Year: 2016 30 Membrane Plates Includes all controls Lightly used, in excellent working condition
Location: Midwest USA
Stock #593-46
Used aluminum plate and frame filter press. Plates: 7″ X 7″ 2-eye S chambers with spare set of plates.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #V854-020
Used Filtration & Separation Dynamics plate and frame filter press Model QPMM1200/40 Polypropylene (96) Recessed plates Capacity: 73.5 cubic feet Filtration Area: 1205 square feet Maximum feed pressure: 100 psig Feed temperature: 167°F 1.5″ cake Cake density 70#/cubic foot Operating...
Location: South USA
Stock #21417-051
Used Netzsch filter press Model #800-66/70 (63) 800mm plates, 2″ thick Automatic plate shifter Serial #400-636
Location: On Site at Perry (Hainesport, NJ - USA)
