Sheet Extrusion Lines

17″ GEC Laboratory Foam Downstream Equipment

Stock #594-05

17″ GEC Laboratory Foam Downstream Equipment

Stock #594-05

Used set of Laboratory foam downstream equipment including the following: a) 1.5″ foam die with stand, 2 zone air ring, 3.5″OD X 5″ water cooled cooling mandrel, inline static mixer, operator control and foam tube slitter. Includes method to supply...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

24″ Wide Sheet Extrusion Line

Stock #20781-2

24″ Wide Sheet Extrusion Line

Stock #20781-2

Used 24″ wide sheet extrusion line consisting of the following: 8″ X 24″ 3-roll chill roll stack currently installed with (3) polished chrome rolls with Rotary unions. Additional (3) rolls available with Matt finish. Chill roll stack includes operator control...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

24″ Wide Sterling 3-Roll Chill Roll Stack

Stock #ZP60843-1

24″ Wide Sterling 3-Roll Chill Roll Stack

Stock #ZP60843-1

Used 24″ wide Sterling 3-roll chill roll stack with (3) 14″ O.D. Polished chrome chill rolls. Each chill roll is equipped with a Rotary Union, air cylinder actuation to top and bottom roll, but no pumping/cooling system included. Previously used...

Location: NJ

Add to Cart View Details

30″ Wide Davis Standard 3-Roll Sheet Stack

Stock #20613-05

30″ Wide Davis Standard 3-Roll Sheet Stack

Stock #20613-05

Used 30″ wide Davis Standard 3-roll sheet stack, previously used in Upstack mode. Includes (3) 12″ O.D. Polished chrome rolls, (3) Sterlco pumps for roll temperature control, 4-speed gearbox and DC motor with controls. Has approximately 12′ cooling conveyor and...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

30″ Wide Davis Standard 3-Roll Sheet Stack

Stock #20740-2

30″ Wide Davis Standard 3-Roll Sheet Stack

Stock #20740-2

Used 30″ wide Davis standard 3-roll sheet stack. Model #F8082, so #49606C. Rolls are driven via silent chain and sprockets by a DC motor. Has 10′ long Idler conveyor, pull roll stand, and shear. Includes hydraulic pump for cylinders on...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

30″ Wide Johnson 3-Roll Sheet Down Stack

Stock #ZP57684-1

30″ Wide Johnson 3-Roll Sheet Down Stack

Stock #ZP57684-1

Used Johnson 16″ diameter X 30″ wide three-roll sheet down stack. Pneumatically operated cored chrome rolls, rolls are driven by a silent chain drive, drive gearboxes for both the chrome rolls and the pull rolls operate at 1.0, 2.07, 5.058...

Location: Midwest USA

Add to Cart View Details

31″ Wide x 20″ OMV 3-Roll Sheet Stack

Stock #20909-3

31″ Wide x 20″ OMV 3-Roll Sheet Stack

Stock #20909-3

Used OMV 3-roll sheet stack, top cored chrome roll. 14″ diameter x 31-1/2″ wide, middle and bottom cored chrome rolls are 19″ diameter x 31-1/2″ wide. All rolls are driven by a 10hp AC Vector motor, (3) individual gearboxes, top:...

Location: Midwest USA

Add to Cart View Details

34″ Cincinnati Milacron 2-Roll Cooling Roll Stack

Stock #ZP58170

34″ Cincinnati Milacron 2-Roll Cooling Roll Stack

Stock #ZP58170

Used Cincinatti Milacron 2-roll cooling roll stack including unwind. Also included in package is the following: – 18″X34″ wide 2-roll chrome plated Co.0ling rolls – driven by 5 HP DC motor rolls are cooled via (3) 5 HP pumps with...

Location: Midwest USA

Add to Cart View Details

34″ Wide Cincinnati Milacron 2-Roll Sheet Take Off

Stock #715-469CR

34″ Wide Cincinnati Milacron 2-Roll Sheet Take Off

Stock #715-469CR

Used 34″ wide Cincinatti Milacron 2-roll sheet take off with 34″ face X 18″ O.D. Rolls. Rolls are mounted in a vertical stack arrangement. Chromed and cored rolls with Rotary unions, silent chain driven with 5 HP, 1750 DC motor...

Location: Midwest USA

Add to Cart View Details

36″ Wide Davis Standard Sheet Extrusion Line

Stock #ZP61339

36″ Wide Davis Standard Sheet Extrusion Line

Stock #ZP61339

Used 36″ wide Davis Standard sheet extrusion line with inline Brown C3030 thermoformer and trim press. Line includes the following: – used Davis Standard sheet extrusion line consisting of 4.5″ Davis standard 34/1 L/D extruder driven by a 250 HP...

Location: Midwest USA

Add to Cart View Details

40″ Wide Sterling Co-Extrusion Sheet Line

Stock #ZP60105

40″ Wide Sterling Co-Extrusion Sheet Line

Stock #ZP60105

Used 40″ wide Sterling co-extrusion sheet line, reconditioned in 1998-2000 to produce films of synthetic paper 4-20 mils thick. Line consists of the following: 3.5″ Sterling 30/1 L/D extruder driven by a 125 HP DC motor with Allen Bradley series...

Location: Mexico

Add to Cart View Details

40″ Wide Johnson Sheet Extrusion Line

Stock #ZP60327

40″ Wide Johnson Sheet Extrusion Line

Stock #ZP60327

Used 40″ wide Johnson sheet extrusion line consisting of the following: – 4.5″ Johnson 24/1 L/D vented extruder with water/air cooling on barrel. Includes DC motor with Pacemaster DC drive and 11.1/1 gearbox ratio. Includes temperature control panel and Beringer...

Location: Midwest USA

Add to Cart View Details

41″ Wide Welex Sheet Extrusion Package

Stock #20773-1

41″ Wide Welex Sheet Extrusion Package

Stock #20773-1

Used 41″ wide Welex sheet extrusion package consisting of the following: – 3.5″ Welex extruder with 30/1 L/D vented and plugged barrel, but includes 2 stage screw and spare screw. Model 3.5-30:1LHSV, serial #4746, new 05/88. Has electrically heated water...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

43″ by 17″ NRM/Mega Machine Sheet Extrusion Line

Stock #20898

43″ by 17″ NRM/Mega Machine Sheet Extrusion Line

Stock #20898

Used NRM/Mega Machine sheet extrusion line, previously run on polypropylene at 350 kg per hour. Line consists of the following: – 4.5″ NRM 32/1 L/D vented (plugged) single screw extruder. Extruder new in 1996, serial #19276, order #56946. Driven by...

Location: Perry New Jersey Warehouse

Add to Cart View Details

45″ Wide Sheet Extrusion Line

Stock #ZP60994

45″ Wide Sheet Extrusion Line

Stock #ZP60994

Used 45″ wide sheet extrusion line including (2) granulators for reducing scrap for use in sheet line. Line consists of the following: primary Pallman granulator driven by a 30kW motor with 27″ X 20″ throat opening including (4) rotor blades,...

Location: EU

Add to Cart View Details

1200 MM Wide Toshiba Multi-Layer Sheet Extrusion Line

Stock #ZP54282-2

1200 MM Wide Toshiba Multi-Layer Sheet Extrusion Line

Stock #ZP54282-2

Used 1200 mm wide Toshiba multi layer sheet extrusion line previously used for PP/PS, 1200 mm maximum width, .2-1.0 mm maximum thickness. Line consists of (2) Toshiba 90 mm extruders, 32/1 L/D, model SW120 screen changer, 1600 mm sheet extrusion...

Location: JA

Add to Cart View Details

48″ Davis Standard Sheet Take-Off Unit

Stock #9323-07

48″ Davis Standard Sheet Take-Off Unit

Stock #9323-07

Used Davis Standard sheet take-off unit consisting of (3) 48″ face rolls mounted in a vertical arrangement for a downstack operation. All three rolls measure 16″ in diameter. Top roll is tungsten and the middle and bottom are chrome. Top...

Location: Midwest USA

Add to Cart View Details

50″ Processing Technologies Inc 3-Roll Down Stack

Stock #ZP61834

50″ Processing Technologies Inc 3-Roll Down Stack

Stock #ZP61834

Used Processing Technologies Inc 3-roll downstack model 5024 serial no. 297-CRS manufactured 2/2000 24″ diameter X 50″ wide lower 2 chrome rolls upper roll is 12″ X 50″ all chrome rolls cored for cooling rolls are hydraulically operated and powered...

Location: Midwest USA

Add to Cart View Details

53″ X 18″ Welex 3-Roll Polishing Stack

Stock #ZP61913

53″ X 18″ Welex 3-Roll Polishing Stack

Stock #ZP61913

Used 53″ X 18″ Welex 3-roll polishing stack, designed for Upstack configuration. Stack includes (3) polished chrome rolls, pump group, 4-speed Selecta gearbox, to 3 HP DC motor, silicone bath and 2-roll haul-off 53″ wide X 8″ O.D. Additional spare...

Location: United Kingdom

Add to Cart View Details

53″ Wide Davis-Welex Sheet Line

Stock #ZP62163

53″ Wide Davis-Welex Sheet Line

Stock #ZP62163

Used 53″ wide Davis/Welex sheet line consisting of the following: – 3.5″ 30/1 Davis standard air cooled extruder driven by 60 HP AC motor. Manufactured in 2000, however, screw and drive are new 2014. Extruder gearbox ration 17.4:1. Includes temperature...

Location: Northeast USA

Add to Cart View Details

54″ Wide NRM Sheet Extrusion Line

Stock #ZP60438-1

54″ Wide NRM Sheet Extrusion Line

Stock #ZP60438-1

Used 54″ wide NRM sheet extrusion line including 4.5″ extruder, sheet downstream, Brown Model 42P thermoformer and Brown model TP30 trim press. Line specifics are as follows: – 4.5″ NRM 24/1 L/D single screw extruder, driven by a 200 HP...

Location: Mexico

Add to Cart View Details

54″ Wide NRM Sheet Extrusion Line

Stock #ZP60438-2

54″ Wide NRM Sheet Extrusion Line

Stock #ZP60438-2

Used 54″ wide NRM sheet extrusion line. Line consists of: – 4.5″ NRM 24/1 L/D vented extruder. Has electrically heated water cooled barrel, direct connected to 200 HP DC motor with Reliance SCR control. Extruder reported rated at 300 kg...

Location: Mexico

Add to Cart View Details

54″ Marshall and Williams Sheet Take-Off Unit

Stock #9323-10

54″ Marshall and Williams Sheet Take-Off Unit

Stock #9323-10

Used Marshall and Williams sheet take-off unit consisting of (3) 54″ face rolls mounted in a vertical arrangement for a downstack operation. All three rolls measure 16″ in diameter and are ceramic coated. Top and bottom rolls are air actuated....

Location: Midwest USA

Add to Cart View Details

54″ PET Sheet Extrusion Line

Stock #ZP61641-1

54″ PET Sheet Extrusion Line

Stock #ZP61641-1

Used pet sheet extrusion line consisting of the following: Werner & Pfleiderer ZSK58 twin screw extruder driven by a 125 HP DC motor. Has electrically heated water cooled segmented barrels including (1) atmospheric and (2) vacuum vents. Scheneck accurate loss-in-weight...

Location: WEST COAST USA

Add to Cart View Details

55″ Wide Union Machine PP Sheet Extrusion Line

Stock #ZP61927-1

55″ Wide Union Machine PP Sheet Extrusion Line

Stock #ZP61927-1

Used 55″ wide Union machine PP sheet extrusion line, new approximately 1995. Line consists of the following: 100mm Union machine extruder previously used at 300kg/hr of PP. Includes automatic feed system and screen changer. Metering gear pump 1450mm sheet extrusion...

Location: Brazil

Add to Cart View Details

4.5″ Prodex Sheet Extrusion Line

Stock #ZP61016-2

4.5″ Prodex Sheet Extrusion Line

Stock #ZP61016-2

Used 4.5″ Prodex sheet extrusion line consisting of the following: 4.5″ Prodex 32/1 L/D extruder. Includes approximately 150 HP DC motor with SCR control. Has flex lip sheet extrusion die with choker bar, 16″ O.D. X 60″ wide downstack chill...

Location: NJ

Add to Cart View Details

63″ Gloucester Sheet Line

Stock #ZP54224-6

63″ Gloucester Sheet Line

Stock #ZP54224-6

Used 4.5″ Welex extruder, 1982, 30:1 L/D ratio, vented, water-cooled, powered by a 250 HP DC motor with spectrum drive. Lufkin gearbox model D165-611C, 10.03 gear ratio. 5 barrel zones, 1 zone for screen changer, 2 for breaker plates. 6...

Location: Midwest USA

Add to Cart View Details

64″ Sterling Sheet Extrusion Line

Stock #ZP61509

64″ Sterling Sheet Extrusion Line

Stock #ZP61509

Used 64″ Sterling sheet extrusion line consisting of: – (1) used UNA Dyn dehumidifying hopper dryer, model DHD-60. Includes hopper. – (1) used 4.5” 24/1 Sterling extruder having a 5-zone electrically heated, water cooled, vented barrel. Gearbox directly driven by...

Location: Midwest USA

Add to Cart View Details

66″ Sterling Sheet Extrusion Line

Stock #ZP60422

66″ Sterling Sheet Extrusion Line

Stock #ZP60422

Used Sterling sheet extrusion line consisting of the following: 4.5″ Sterling 36/1 L/D single screw extruder driven by a 200 HP DC motor with SCR control. Extruder has 78″ centerline. Previously used extruding horizontally into chill roll chrome nip roll....

Location: Canada

Add to Cart View Details

8″ Ax Plasticos Micro Extrusion Sheet Line

Stock #ZP60767-1

8″ Ax Plasticos Micro Extrusion Sheet Line

Stock #ZP60767-1

Used ax Plasticos micro extrusion sheet line, new 2010. Line consists of a 16mm ax Plasticos micro extruder, 26/1 L/D. Includes material hopper, unitized sheet downstream equipment with (2) chill rolls, 4″ O.D. X 8″ wide, cooling conveyor assembly, rubber...

Location: West Coast USA

Add to Cart View Details

8″ X 5″ Davis Standard-Wayne Extrusion Line

Stock #817-67

8″ X 5″ Davis Standard-Wayne Extrusion Line

Stock #817-67

Used 8.5″ wide Davis Standard/Wayne Laboratory sheet extrusion line consisting of the following: 3/4″ Davis Standard model KLJ-075 pedestal extruder, 24:1 L/D, serial #AG057, S.O. #74488. 230/3PH/60 hz input power, electrically heated air cooled barrel with general purpose screw driven...

Location: Midwest USA

Add to Cart View Details

8″ Wide x 5″ Wayne Horizontal Sheet Extrusion Line

Stock #820-86

8″ Wide x 5″ Wayne Horizontal Sheet Extrusion Line

Stock #820-86

Used 8″ wide Wayne horizontal sheet extrusion line. Package includes (5) rolls total, (3) chrome, (2) rubber. Each roll is equipped with rotary union. Includes (2) gearhead motors, operator controls and spare rubber roll. Serial #9545.

Location: Northeast USA

Add to Cart View Details

80″ (2050 MM) Wide Omipa Sheet Extrusion Line

Stock #ZP61304

80″ (2050 MM) Wide Omipa Sheet Extrusion Line

Stock #ZP61304

Unused 80″ (2050 mm) wide Omipa sheet extrusion line previously intended for use on PMMA (poly {methyl Methacrylate}), “acrylic glass, Plexiglas sheet” from 2-12mm thick. Production capacity 750-850 kilograms per hour, 480 volt AC input voltage. Left hand side extrusion...

Location: Mexico

Add to Cart View Details

80″ Wide Sheet Extrusion Line With 6″ €ented Single Screw Extruder and Screen Changer

Stock #ZP62240

80″ Wide Sheet Extrusion Line With 6″ €ented Single Screw Extruder and Screen Changer

Stock #ZP62240

Used 80″ wide sheet extrusion line consisting of the following: – 6″ vented single screw extruder including screen changer with hydraulic pump, and approximately 20 hp melt pump – 80″ flex lip sheet extrusion die with restrictor bar – 80″...

Location: Midwest USA

Add to Cart View Details

84″ Wide x 18″ Johnson 3-Roll Sheet Stack

Stock #20909-2

84″ Wide x 18″ Johnson 3-Roll Sheet Stack

Stock #20909-2

Used 84″ wide Johnson Plastics Machinery 3-roll Sheet Stack. Serial #7844-72. Built 1972. Has (3) 18″ diameter x 84″ face matte finish rolls. Pneumatically adjusted. All (3) rolls driven by a 3 hp 3/60/230/460 volt, 1755 rpm gear motor with...

Location: Midwest USA

Add to Cart View Details

2500MM Wide Sheet Extrusion Line

Stock #ZP61927-2

2500MM Wide Sheet Extrusion Line

Stock #ZP61927-2

Used 2500mm wide sheet extrusion line previously used for PP and PEAD in 3 to 8mm thicknesses. Line new approximately 1995 and consists of the following: 150mm extruder rated at 330-550kg per hour on PP and PEAD. Includes automatic feed...

Location: BRAZIL

Add to Cart View Details