Pelletizing Lines

1.0″ 28/1 Prism Twin Screw Compounding Extruder

Stock #ZP61908

1.0″ 28/1 Prism Twin Screw Compounding Extruder

Stock #ZP61908

Used 24mm Prism twin screw compounding extruder with pelletizing downstream. Line consists of a K-Tron Volumetric feeder, 28/1 L/D co-rotating twin screw extruder with vented barrel, 3-hole strand die, water bath air knife and 75mm wide (3) strand pelletizer. Line...

Location: United Kingdom

Add to Cart View Details

1.0″ 30/1 Berstorff Co-Rotating Twin Screw Extruder

Stock #ZP61937

1.0″ 30/1 Berstorff Co-Rotating Twin Screw Extruder

Stock #ZP61937

Used 25mm Berstorff co-rotating twin screw extruder model ZE25X30D. Extruder has 30/1 L/D ratio with electrically heated water cooled vented barrel. Driven by a 15 HP motor with 4.14/1 gearbox ratio. Previously used on Dupont Surlyn (ionometers). Electrical requirements are...

Location: West Coast USA

Add to Cart View Details

1.0″ 40/1 Prism Pelletizing Line

Stock #ZP61704

1.0″ 40/1 Prism Pelletizing Line

Stock #ZP61704

Used Prism pelletizing line consisting of the following: (1) Prism parallel twin screw extruder, model TSE 24TC, 24 mm co-rotating screws, 40:1 L/D, electrically heated, water cooled barrel, (3) top vents with (2) plugged, 6 barrel zones with on board...

Location: Midwest USA

Add to Cart View Details

1.2″ 18/1 Buss Laboratory Ko-Kneader/Extruder Package

Stock #ZP62271

1.2″ 18/1 Buss Laboratory Ko-Kneader/Extruder Package

Stock #ZP62271

Used Buss model MKS 30-18D /E40 laboratory Ko-Kneader/extruder package. New 1998. Serial #98-1049. Package includes the following: – 30 mm diameter single screw, 18:1 L/D ratio. 4-zone electrically heated barrel, water cooled. Water cooled feed throat with hopper. Driven by...

Location: Northeast USA

Add to Cart View Details

1.2″ 36/1 APV Twin Screw Powder Coatings Line

Stock #719-09

1.2″ 36/1 APV Twin Screw Powder Coatings Line

Stock #719-09

Used APV twin screw powder coatings line consisting of the following: – 30mm APV 36/1 L/D co-rotating twin screw extruder. Includes “clam shell” barrel, operator control panel and motor drive. Extruder model 11A-MP-11A2030RT-25. Serial #SW70093. New 1989. Has approx. 500...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

1.6″ 32/1 Comac Twin Screw Pelletizing

Stock #ZP62242

1.6″ 32/1 Comac Twin Screw Pelletizing

Stock #ZP62242

Used 40mm Comac twin screw pelletizing line consisting of the following: Comac co-rotating twin screw extruder type EBC40, Series HT, 32/1 L/D screw length. 43mm nominal screw diameter. Has electrically heated water cooled barrel, (2) top vents (1 closed) including...

Location: South USA

Add to Cart View Details

1.8″ 7/1 Buss Powder Coatings Line

Stock #ZP60386

1.8″ 7/1 Buss Powder Coatings Line

Stock #ZP60386

Used Buss powder coatings line consisting of the following: Buss model PLK46 Ko-Kneader with 7/1 L/D. New 1991. Includes motor with 18.9kW capacity supplying 20-412 rpm screw speed. Has crammer feeder, jacketed barrel. SBS 3.45 meter X 300mm cooling belt,...

Location: NETHERLANDS

Add to Cart View Details

2.2″ Cincinatti Milacron PVC Compounding Line

Stock #ZP61348

2.2″ Cincinatti Milacron PVC Compounding Line

Stock #ZP61348

Used Cincinatti Milacron PVC compounding line consisting of the following: – (1) Dosing feeder with variable speed control – Cincinatti Milacron Conical twin screw extruder model CM55 HP, driven by a 40 HP DC motor, includes vented barrel with vacuum...

Location: Midwest USA

Add to Cart View Details

2.2″ 13/1 Munchy Film Reclaim Line

Stock #20179

2.2″ 13/1 Munchy Film Reclaim Line

Stock #20179

Used Munchy film reclaim line. Model P55A070, serial 426 0996. Line manufactured in 1996. Line consists of the following: (a) Munchy 55mm tapered screw extruder with 4″/2.16″ diameter tapered screw. Has electrically heated air cooled barrel and approximately 13/1 L/D...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

2.2″ 13/1 Munchy Film Reclaim Line

Stock #9756-1

2.2″ 13/1 Munchy Film Reclaim Line

Stock #9756-1

Used Munchy film reclaim line. Model P55A-101, serial #9010198. Line rated at 125 lbs an hour on PE and 110 lbs an hour on polypropylene. Line manufactured 1997. 460/3/60. Line consists of the following: a) Munchy tapered screw extruder with...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

2.2″ 28/1 Werner & Pfleiderer Co-Rotating Twin Screw Extruder

Stock #ZP57787-1

2.2″ 28/1 Werner & Pfleiderer Co-Rotating Twin Screw Extruder

Stock #ZP57787-1

Used 57mm Werner & Pfleiderer model ZSK57 co-rotating twin screw extruder. Driven by a 50 HP motor supplying 320 rpm screw speed. Last used at 200-350 lbs. Per hour on polypropylene. Has 2-lobe screw design, nitrited barrels, electrically heated water...

Location: Midwest USA

Add to Cart View Details

2.7″ Erema Film Recycling Line

Stock #ZP61675-2

2.7″ Erema Film Recycling Line

Stock #ZP61675-2

Used 2008 Erema model PC906T/117 film recycling line consisting of the following: – 70mm Erema single screw non-vented extruder fed from Erema compacting/densifying hopper. Includes approximately 24″ wide X 20′ inclined conveyor, water ring pelletizer, and operator controls.

Location: MEXICO

Add to Cart View Details

3.0″ 16/1 Hydreclaim Film Recycling System

Stock #20222

3.0″ 16/1 Hydreclaim Film Recycling System

Stock #20222

Used Hydreclaim film recycling system consisting of the following: (1) Hydreclaim model FF-90/50 approximately 3-1/2″ single screw extruder, approximately 16:1 L/D ratio. Electrically heated, air cooled 4-zone nonvented barrel. Side screw feed throat with an anti-bridging hopper. Approximately 2-1/2″ diameter...

Location: Midwest USA

Add to Cart View Details

3.0″ Munchy Recycling Line

Stock #ZP61710

3.0″ Munchy Recycling Line

Stock #ZP61710

Used Munchy recycling line model P100. Line consists of the following: (1) Munchy single screw extruder model P100, electrically heated, air cooled, non vented barrel driven by 69 kW DC motor and gearbox. (1) Operator control panel with Eurotherm 94...

Location: South USA

Add to Cart View Details

3.0″ Munchy Film Reclaim Line

Stock #20714-1

3.0″ Munchy Film Reclaim Line

Stock #20714-1

Used 80mm (3″) Munchy film reclaim line Model #P-80A Serial #331 0595 Gearbox #ITA 045 Drive: 30 KW Total KW: 42 Line consists of the following: – 80mm conical single screw extruder model P-80A. Has electrically heated, air cooled barrel....

Location: South USA

Add to Cart View Details

3.1″ 10/1 Baker Perkins/SBS (Steel Belt System) Powder Coating Line

Stock #20806

3.1″ 10/1 Baker Perkins/SBS (Steel Belt System) Powder Coating Line

Stock #20806

Used Baker Perkins/SBS (Steel Belt System) powder coating line consisting of: – 80mm 10/1 L/D twin screw extruder. Model MPCV 80, Serial #65097. Driven by 60 kW DC motor, 440 volt with EEI SCR motor controller. Has clam shell design...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

3.2″ 38/1 Berstorff Co-Rotating Twin Screw Extrusion Line

Stock #ZP62247

3.2″ 38/1 Berstorff Co-Rotating Twin Screw Extrusion Line

Stock #ZP62247

Used 81mm Berstorff model ZE75AX38D-UTX co-rotating twin screw extrusion line, new in 2004. Extrusion line is rated 700 kg per hour. Previously used for extruding 35% talc/ath into either PP or PVB. Maximum screw rpm is 600. Line consists of...

Location: Europe

Add to Cart View Details

3.3″ 40/1 Bandera Regranulating Line

Stock #UG6186

3.3″ 40/1 Bandera Regranulating Line

Stock #UG6186

Second hand regranulating line manufactured by Costruzioni Meccaniche Luigi Bandera SPA (Italy). The line consists of: 1) single screw extruder type TR.85: * screw diameter 85 mm; * L/D = 40/1; * working speed = 144 obr./min; * electric motor...

Location: Poland

Add to Cart View Details

3.5″ Davis Standard Dual Diameter Repelletizing Line

Stock #ZP61104

3.5″ Davis Standard Dual Diameter Repelletizing Line

Stock #ZP61104

Used Davis Standard 350/600 dual diameter repelletizing line, new 1994. Has 6″ diameter feed screw tapering to 3.5″ diameter discharge. Driven by a 150 HP DC motor with SCR control. Has oversized feed throat for low bulk density material, 17.39/1...

Location: West Coast USA

Add to Cart View Details

3.6″ 35/1 Werner & Pfleiderer Twin Screw Pelletizing Line

Stock #796-139

3.6″ 35/1 Werner & Pfleiderer Twin Screw Pelletizing Line

Stock #796-139

Used Werner & Pfleiderer 92mm twin screw pelletizing line consisting of the following: (1) ZSK-92 W385E 92mm co-rotating twin screw extruder, approximately 36:1 L/D ratio, serial 3226877, work #509941. Built 1987. (9) barrel sections with (1) feed with hopper, (2)...

Location: Midwest USA

Add to Cart View Details

4.0″ Munchy Recycling Line

Stock #ZP56011-3

4.0″ Munchy Recycling Line

Stock #ZP56011-3

Used Munchy recycling line consisting of: (1) Munchy single screw extruder, model P100, electrically heated, air cooled barrel, driven by a 69 kW DC motor through a gearbox, with control panel, Eurotherm 94 digital controller, Eurotherm 590 DC drive panel,...

Location: Midwest USA

Add to Cart View Details

4.0″ 38/1 Erema Film/Fiber Pelletizing Line

Stock #20663-1005

4.0″ 38/1 Erema Film/Fiber Pelletizing Line

Stock #20663-1005

Used 100mm Erema model RM100TVE film/fiber pelletizing line new 2000. Line consists of the following: 100mm (4″) Erema model RM100TVE extruder serial P00/001. Extruder is driven by a 132 kW AC motor with inverter. Extruder has electrically heated water cooled...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

4.5″ 24/1 Prodex Pelletizing Line

Stock #ZP62359

4.5″ 24/1 Prodex Pelletizing Line

Stock #ZP62359

Used pelletizing line consisting of: – 4.5″ 24/1 L/D Prodex extruder. Has electrically heated air cooled barrel. Driven by 150 HP DC motor. – Screen changer – Strand die – Water trough – 14″ wide pelletizer.

Location: Midwest USA

Add to Cart View Details

4.5″ 32/1 HPM Prodex Pelletizing Line

Stock #ZP62237

4.5″ 32/1 HPM Prodex Pelletizing Line

Stock #ZP62237

Used HPM Prodex pelletizing line consisting of the following: – 4.5 32/1 L/D HPM Prodex vented extruder. New 2006. Electrically heated. Water cooled barrel. Driven by 250 HP motor. Included temperature control panel and drive. – 4.5″ polymer systems hydraulic...

Location: South USA

Add to Cart View Details

4.5″ 32/1 PTI Underwater Pelletizing Line

Stock #ZP62361

4.5″ 32/1 PTI Underwater Pelletizing Line

Stock #ZP62361

Used PTI Underwater Pelletizing Line consisting of: (1) PTI 4.5” 32/1 L/D Trident Series vented Single Screw Extruder. Model: 4500. New 1995. Has electrically heated, water cooled barrel. Driven by a 250 HP, 500 volt, 1750/25000 rpm motor thru a...

Location: South USA

Add to Cart View Details

5.0″ 7/1 Buss Ko-Kneader Package

Stock #ZP55827

5.0″ 7/1 Buss Ko-Kneader Package

Stock #ZP55827

Used Buss Ko-Kneader package model 1418. Has 140mm Buss Ko-Kneader, 11:1 L/D, oil heated barrel and screw with motor and crammer feeder. Has 180mm cross head extruder, water heated screw and equipped with motor. Mounted on extruder is an electrically...

Location: Midwest USA

Add to Cart View Details

5.0″ 36/1 Erema Film/Fiber Pelletizing Line

Stock #20663-1004

5.0″ 36/1 Erema Film/Fiber Pelletizing Line

Stock #20663-1004

Used 120mm Erema model RM120TVE film/fiber pelletizing line new 2000. Line consists of the following: Erema model RM120TVE, serial #C99/138, 120mm extruder with 36/1 L/D double vented barrel. Extruder is driven by a 160 kW AC motor with inverter. Double...

Location: Midwest USA

Add to Cart View Details

5.5″ 7/1 Buss Compounding Line

Stock #ZP61731

5.5″ 7/1 Buss Compounding Line

Stock #ZP61731

Used Buss PR140 compounding line consisting of the following: Buss model PR140 Ko-Kneader with approximately 7/1 L/D. Driven by approximately 50 HP motor. Includes jacketed barrel, Brabender starve feeder, belt driven to AC motor. Has 6″ flat die at discharge...

Location: MEXICO

Add to Cart View Details

5.9″ 10/1 Baker Perkins Ko-Kneader Pelletizing Line

Stock #ZP50423

5.9″ 10/1 Baker Perkins Ko-Kneader Pelletizing Line

Stock #ZP50423

Used Baker Perkins Ko-Kneader pelletizing line consisting of the following: Baker Perkins UPK-150UEM 150mm Ko-Kneader, 10:1 L/D, split barrel, jacketed for 300 psi, powered by a 250 HP drive. Screw rpm 32-126. Includes size 6 Baker Perkins crammer, 10 HP,...

Location: Midwest USA

Add to Cart View Details

5.9″ 33/1 Line For Recycling Plastics

Stock #UP5937

5.9″ 33/1 Line For Recycling Plastics

Stock #UP5937

Used line for recycling plastics, chinese made. Line includes: auger feeder driven by electric motor 7.5 kW. Single screw extruder with screw diameter 150 mm (5.9″) and 200=LD-200 ratio 33. Screw made of 38CrMoAl. Barrel has degassing and ten heating...

Location: Poland

Add to Cart View Details

5.9″ 36/1 Granulator/Compounding Extruder

Stock #ZS61287

5.9″ 36/1 Granulator/Compounding Extruder

Stock #ZS61287

Unused pet flakes granulator / compounding extruder. Transforms pet flakes (from recycled pet bottles) into granules. Chinese made by Jiangyin City Xinda Plastics Machinery China. Single screw extruder with screw diameter 150 mm (5.9″) and 200=LD-200 ratio 33. Screw made...

Location: Europe

Add to Cart View Details

6.0″ 28/1 Underwater Pelletizing Line

Stock #ZP62330

6.0″ 28/1 Underwater Pelletizing Line

Stock #ZP62330

Used underwater pelletizing line consisting of the following: – Crammer feeder – 6′ 28/1 Sterling vented extruder. Driven by a 400 HP motor. Has electrically heated, air cooled barrel. – Screen changer – Underwater pelletizer – Gala spin dryer –...

Location: Midwest USA

Add to Cart View Details

6.2″ 17/1 Werner & Pfleiderer Co-Rotating Twin Screw Pelletizing Line

Stock #ZP60325

6.2″ 17/1 Werner & Pfleiderer Co-Rotating Twin Screw Pelletizing Line

Stock #ZP60325

Used 160mm Werner & Pfleiderer co-rotating twin screw pelletizing line. Line consists of the following: 160mm Werner & Pfleiderer twin screw extruder with 17/1 L/D (6 barrel sections). Extruder is driven by approximately a 400kW main drive, has electrically heated...

Location: ITALY

Add to Cart View Details

6.2″ 32/1 Erema Pelletizing Line

Stock #ZP62222

6.2″ 32/1 Erema Pelletizing Line

Stock #ZP62222

Used 160mm Erema pelletizing line, reported rebuilt in 2015. Line includes the following: Erema model RGA160E extruder, 32/1 L/D double vacuum vented barrel, water cooled, electrically heated. Extruder driven by a 300 HP, 460 volt motor. Includes 150 HP, 460...

Location: Canada

Add to Cart View Details

6.2″ 33/1 Sorema Pelletizing Line

Stock #ZP61990

6.2″ 33/1 Sorema Pelletizing Line

Stock #ZP61990

Used 160mm Sorema pelletizing line consisting of the following: Sorema 160mm vented extruder with 33/1 L/D. Previously used on PE, PP and PS. Has 12-zone temperature control panel, hydraulic screen changer, Beringer model 12V pelletizer with centrifugal dryer but no...

Location: United Kingdom

Add to Cart View Details

6.5″ Battenfeld Planetary Roller Extruder Pelletizing Line

Stock #ZP61253

6.5″ Battenfeld Planetary Roller Extruder Pelletizing Line

Stock #ZP61253

Used Battenfeld model ZSE170/250 planetary roller extruder pelletizing line. Package consists of ZSE170 roller extruder equipped with model SW170 crammer feeder, planetary roller extruder model ZSE170 and hot melt discharge extruder 250mm. Includes (2) heating/cooling temperature controllers, die head and...

Location: West Coast USA

Add to Cart View Details

6.7″ 30/1 Werner & Pfleiderer Twin Screw Extruder

Stock #ZP62122

6.7″ 30/1 Werner & Pfleiderer Twin Screw Extruder

Stock #ZP62122

Used 170mm Werner & Pfleiderer 30/1 L/D vented twin screw extruder with a co-rotating screw design. Has oil heated water cooled barrel and includes screen changer, die plate, model UG300 cutter, Carter Day spin dryer, and quench water tank. Extruder...

Location: West Coast USA

Add to Cart View Details

7.8″ 16/1 Francis Shaw Banbury Compounding Package

Stock #ZP53117

7.8″ 16/1 Francis Shaw Banbury Compounding Package

Stock #ZP53117

Used Francis Shaw Banbury compounding package consisting of the following: Francis Shaw K2A Banbury mixer with 600 HP DC Siemens motor 0-1500 variable rpm, 60 pound batch weight for material with specific gravity 1.0. Estimated 500-1500kg/hr capacity depending on materials....

Location: HUNGARY

Add to Cart View Details

8″/6″ 30/1 Leistritz Dual Diameter Film Reclaim Line

Stock #ZP58163

8″/6″ 30/1 Leistritz Dual Diameter Film Reclaim Line

Stock #ZP58163

Used 200mm/150mm (8″/6″) Leistritz dual diameter film reclaim line. Line new 1982. Reported new barrels and screws 2003. Extruder driven by 260 kW motor, has PHT water ring pelletizing system new 2003, includes Vicoplan single shaft shredder with 90 kW...

Location: EU

Add to Cart View Details

8″ 30/1 Single Screw Extruder

Stock #ZP62252

8″ 30/1 Single Screw Extruder

Stock #ZP62252

Used 8″ 30/1 L/D single screw extruder with Lufkin gear box. Extruder has a 30/1 L/D vented barrel, driven by an 800 HP DC motor. Has temperature control panel, 12.1 gear ratio, 8″ crammer feeder, and Beringer water ring pelletizing...

Location: South USA

Add to Cart View Details

Plastic Foil Recycling Line

Stock #XZS61286

Plastic Foil Recycling Line

Stock #XZS61286

Used plastic foil (mainly low-density polyethylene, LDPE) recycling line. Italian made, new in 2003. Including the following: feeding conveyor, shredder, feeding auger, washer, cleaning system, mechanical (centrifugal) dryer, heat dryer, blower, cyclone, receiving silo, flake compactor. Reported to be in...

Location: EU

Add to Cart View Details

Sorema PET Recycling Line

Stock #ZP61920

Sorema PET Recycling Line

Stock #ZP61920

Used Sorema PET recycling line for pet bottles. New in 2007. Line can produce up to 1300 kg per hour of pet bottles supplying pet bottle flakes as raw material. Power for the line is 380 volts, 3 phase, 50...

Location: Asia

Add to Cart View Details