Co-Rotating Twin Screw Extruders

3mm Extruder Technology Model ET-003 30/1 L/D Twin Screw Extruder

Stock #ZP60559

3mm Extruder Technology Model ET-003 30/1 L/D Twin Screw Extruder

Stock #ZP60559

Used 3mm extruder technology model #et-003 30/1 L/D twin screw extruder. Stainless steel construction. Electrically heated, water cooled, split barrel design with (2) plugged vent ports. 500 rpm screw speed. Driven by 1/2 HP 230/460 volt AC motor with inverter....

Location: Midwest USA

Add to Cart View Details

28mm Werner & Pfleiderer Type ZDS-K28 24:1 L/D Twin Screw Extruder.

Stock #ZP54393

28mm Werner & Pfleiderer Type ZDS-K28 24:1 L/D Twin Screw Extruder.

Stock #ZP54393

Used Werner & Pfleiderer twin screw extruder, type ZDS-K28, 28mm screws, 24:1 L/D parallel screw, electrically heated, liquid cooled, 5 barrel sections dual vented and plugged, 1 feed section, 5 HP DC drive with SCR controller Werner & Pfleiderer control...

Location: Midwest USA

Add to Cart View Details

34mm Leistritz Model LSM34GL Co-Rotating Twin Screw Extruder

Stock #20291-2

34mm Leistritz Model LSM34GL Co-Rotating Twin Screw Extruder

Stock #20291-2

Used 34mm Leistritz Co.-rotating twin screw extruder model LSM 34 GL. Has 42/1 L/D barrel but no screws elements included. Has 34/1 L/D screw shafts included. Serial # 330 1722 01, new 1989. Has 12 barrel sections total with 3...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

40mm Berstorff Model ZE40 35/1 L/D Co-Rotating Twin Screw Extruder

Stock #20058-1

40mm Berstorff Model ZE40 35/1 L/D Co-Rotating Twin Screw Extruder

Stock #20058-1

Used 40mm Berstorff model ZE40 35/1 L/D Co.-rotating twin screw extruder. New 1988. Serial #22-E71.00, E.O. #3491/88, project #301-4964. Electrically heated, air cooed barrel, water cooled feed throat. Belt driven by a 40 HP motor and SCR drive. Rated at...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

40mm Werner & Pfleiderer Model ZSK40232 5E Co-Rotating Twin Screw Extruder

Stock #20706-7

40mm Werner & Pfleiderer Model ZSK40232 5E Co-Rotating Twin Screw Extruder

Stock #20706-7

Used Werner & Pfleiderer model ZSK40232 5E Co.-rotating twin screw extruder. Has 38/1 L/D (9 barrel sections) direct connected to 60 HP DC motor. Includes operator control panel, has gearbox model 2a33.4/325. Serial #44637, with 4.46/1 gear ratio. Extruder serial...

Location: Northeast USA

Add to Cart View Details

43 MM Coperion Twin Screw Extruder

Stock #RG9111

43 MM Coperion Twin Screw Extruder

Stock #RG9111

Used Coperion type ZSK 43 Megavolume twin screw extruder. Extruder length 1350mm. Screw diameter 43mm. Main drive 112kW. Working hours 1524. Unit has (8) barrels Nidrided steel. Adapter plate 8/0 heated with temperature and pressure measuring Point. Adapter with Ball...

Location: EUROPE

Add to Cart View Details

58mm Werner & Pfleiderer Model ZSK58 Co-Rotating Twin Screw Extruder

Stock #ZP61641

58mm Werner & Pfleiderer Model ZSK58 Co-Rotating Twin Screw Extruder

Stock #ZP61641

Used Werner & Pfleiderer model ZSK58 Co.-rotating twin screw extruder, new in 1993. Extruder is equipped with vented 33/1 L/D barrel with (8) barrel sections. Extruder reported with extremely limited use in lab trials only. Extruder is an (8) barrel...

Location: WEST COAST USA

Add to Cart View Details

58mm Werner & Pfleiderer “Exchange”, 32/1 L/D, Co-Rotating Twin Screw Extruder

Stock #719-02

58mm Werner & Pfleiderer “Exchange”, 32/1 L/D, Co-Rotating Twin Screw Extruder

Stock #719-02

Used 58mm Werner & Pfleiderer model ZSK58GB “exchange”, 32/1 L/D, Co.-rotating twin screw extruder. New 1995 but extruder was reconditioned and equipped with 3.4/1 gearbox new 2006 with a “super” torque rating supplying 960 newton meters. Serial #37035, id #864142,...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

75mm Berstorff Model ZE75A Co-Rotating Twin Screw Compounding Extruder

Stock #ZP62299-1

75mm Berstorff Model ZE75A Co-Rotating Twin Screw Compounding Extruder

Stock #ZP62299-1

Used Berstorff co-rotating twin screw compounding extruder, new 2014. Extruder is equipped with the following items: Motan vacuum loading system Model HBS1600/1 Metro, and loader Model HES-250 Metro. Colortronic Graviblend Plus 4-component blending system with Bunting hopper magnet. Nordson Xalloy...

Location: Midwest USA

Add to Cart View Details

83mm Werner & Pfleiderer Model ZSK 83 Co-Rotating Twin Screw Extruder

Stock #20419-2

83mm Werner & Pfleiderer Model ZSK 83 Co-Rotating Twin Screw Extruder

Stock #20419-2

Used 83mm Werner & Pfleiderer model ZSK 83 Co.-rotating twin screw extruder, new 1997. Serial #180995. Extruder is equipped with (7) barrel sections, supplying 20/1 L/D, including vent in barrel # 4, electrically heated & water cooled, 150 HP motor,...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

83mm Werner & Pfleiderer Model ZSK 83 Co-Rotating Twin Screw Extruder

Stock #20419-1

83mm Werner & Pfleiderer Model ZSK 83 Co-Rotating Twin Screw Extruder

Stock #20419-1

Used 83mm Werner & Pfleiderer model ZSK 83 Co.-rotating twin screw extruder. Serial #180996, project # 97-6253, 8/1997. Extruder is equipped with gearbox having ratio 8.70/1,(6) barrel sections, 150 HP motor 38.4/320 volts, 3PH, 8/87HZ, 225/2590 but no electrical controls.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

92mm Werner & Pfleiderer ZSK92-M385 Co-Rotating Twin Screw Extruder

Stock #ZP61673

92mm Werner & Pfleiderer ZSK92-M385 Co-Rotating Twin Screw Extruder

Stock #ZP61673

Used Werner & Pfleiderer ZSK92-M385 Co.-rotating twin screw extruder, new 1984. Has 24/1 L/D (approximately 6 barrel sections) including dual vent system. No vacuum system is included. All barrel sections reported to include replaceable liners, extruder is driven by a...

Location: AUSTRALIA

Add to Cart View Details

96mm Leistritz Model ZSE96 Co-Rotating Twin Screw Extruder

Stock #ZP61914

96mm Leistritz Model ZSE96 Co-Rotating Twin Screw Extruder

Stock #ZP61914

Used 96mm Leistritz model ZSE96 Co.-rotating twin screw extruder, new 1991. Previously used with 450 HP motor which is not available. Has 250 rpm screw speed, previously used on hips, ABS, LDPE. Unit is equipped with a vented barrel, electrically...

Location: West Coast USA

Add to Cart View Details