3 1/2" Extruders

100mm Davis Standard Extruder L/D 30:1 Non-Vented

Stock #9540-4

100mm Davis Standard Extruder L/D 30:1 Non-Vented

Stock #9540-4

Used 100mm Davis Standard 30/1 L/D non-vented Extruder. Model 100MM35F, Serial #M3027, new 12/1991. Has barrel, electrically heated, water cooled barrel. Driven by a 125 HP Reliance DC with Reliance SCR control. Gearbox ratio is 17.44:1. No temperature control panel...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

100mm Davis Standard Single Screw Extruder 26:1

Stock #9538-350

100mm Davis Standard Single Screw Extruder 26:1

Stock #9538-350

Used 100mm 26/1 L/D Davis Standard single screw Extruder. Model 3.5MV-350, Serial #16467 new 12/2000. Driven by 60 HP AC motor 3/60/460V with AC variable speed inverter. Has electrically heated 5-zoned air cooled barrel. Includes temperature control panel with 5...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

3″ Graham Engineering Corp. Single Screw Extruder L/D 24:1 Non-Vented

Stock #776-82C

3″ Graham Engineering Corp. Single Screw Extruder L/D 24:1 Non-Vented

Stock #776-82C

Used 3″ 24:1 L/D Graham Engineering Corporation single screw extruder. Model 3024-A, serial #45762-89. Has electrically heated non-vented and air cooled 4-zone barrel with a 20″ centerline height. Feed throat is water cooled, no hopper included. Driven by a 60...

Location: Midwest USA

Add to Cart View Details

3.14″ Milacron Cincinnati Conical Twin-Screw Extruder

Stock #HG62172

3.14″ Milacron Cincinnati Conical Twin-Screw Extruder

Stock #HG62172

Used 3.14″ Milacron Cincinnati model TC 80 conical twin screw extruder. Has screw diameter front/rear 3.14/6.13″, lenght to front diameter ratio: 23D, speed range 7-33 rpm. Barrel has 4 heating zones, total barrel heating capacity 43 kW. Driven by 75...

Location: Central Europe

Add to Cart View Details

3.5″ Akron 30/1 L/D Vented Extruder

Stock #21125-01

3.5″ Akron 30/1 L/D Vented Extruder

Stock #21125-01

Used 3.5″ Akron 30/1 L/D vented extruder. Drvien by a 75 hp DC motor with SCR controller. Has 3.5″ screen changer and Coleman gearbox with 13.95/1 gear ratio. Previously used on color concentrate.

Location: Midwest USA

Add to Cart View Details

3.5″ CDL 32:1 L/D Dual Diameter Crown Reclaim Extruder

Stock #20932-1

3.5″ CDL 32:1 L/D Dual Diameter Crown Reclaim Extruder

Stock #20932-1

Used approximately 3.5/4.5 dual diameter Crown reclaim Extruder, designed for low bulk density material. Has 8″ x 16″ water cooled feed throat with air actuated stuffer ram. Extruder has 32:1 L/D vented barrel, electrically heated water cooled. Includes 75 hp...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

3.5″ Hartig Extruder 24:1 Air Cooled

Stock #KG61876

3.5″ Hartig Extruder 24:1 Air Cooled

Stock #KG61876

Reportedly unused 3.5″ Hartig model 35-M24 extruder air cooled. Has L/D ratio 24/1. Material of screw AISI 4140. Has Lufkin model DH200D-611 gearbox rated 20.8:1 and 75 Kw/2700 rpm motor. Manufactured in 1989 and reportedly never used. Technical documentation available.

Location: EUROPE

Add to Cart View Details

3.5″ Welex Extruder L/D 30:1 Vented

Stock #9547-1

3.5″ Welex Extruder L/D 30:1 Vented

Stock #9547-1

Used 3.5″ Welex 30:1 L/D Extruder. Serial #2453, new 1984. Has electrically heated, water cooled (closed loop), vented, and plugged barrel. Includes vent stack and vacuum pump. Includes Koellmann gearbox with 11.26:1 ratio, SN# 2270773, size UNEX 5.0, rated at...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

3.5″ Royle Plastic Extruder L/D 16:1

Stock #2826-4

3.5″ Royle Plastic Extruder L/D 16:1

Stock #2826-4

Used 3.5″ Royle 16:1 L/D plastic extruder. Serial #2663. Electric Spirod heaters with air and water cooling. Has 4-zone temperature control panel. Fitted with 5/8″ X 7/8″ head. Right angle reducer to 60 HP Louis Allis type CLC eddy current...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

3.5″ Welex Extruder 30:1

Stock #M4205J

3.5″ Welex Extruder 30:1

Stock #M4205J

Used 3.5″ 30:1 Welex extruder having an electrically heated, air cooled barrel. Lufkin change gearbox – screw RPM 225. Unit was originally driven by a 100 HP DC motor that is not there. There is a Spectrum lll SCR drive...

Location: Midwest USA

Add to Cart View Details

3.5″ Alfa Marathon Single-Screw Extruder 30:1 Vented

Stock #20031-1

3.5″ Alfa Marathon Single-Screw Extruder 30:1 Vented

Stock #20031-1

Used 3.5″ 30:1 Alfa Marathon single-screw extruder. Unit has an electrically heated, water cooled, and vented barrel. 30″ centerline height. Gearbox has reduction ratio of 11.2:1 and is driven by 150 HP, 575 volt, 60 HZ, 1750 RPM AC motor...

Location: Midwest USA

Add to Cart View Details

3.5″ Davis Standard Extruder 30:1 Vented

Stock #ZP50749

3.5″ Davis Standard Extruder 30:1 Vented

Stock #ZP50749

Used 3.5″ 30:1 Davis Standard extruder having a 5 zone electrically heated water cooled, vented and plugged barrel at a 72″ centerline height. Gearbox has a ratio of 11.8:1, is rated at 158 HP with a service factor of 1.25....

Location: Midwest USA

Add to Cart View Details

3.5″ Polytruder Extruder 34:1 L/D Non-Vented

Stock #ZP62223-3

3.5″ Polytruder Extruder 34:1 L/D Non-Vented

Stock #ZP62223-3

Used 3.5″ Polytruder 34:1 L/D non-vented extruder. Electrically heated air cooled barrel, driven by 125 HP DC motor with SCR control, 480 volt AC input. Has transformer base mounted, Flender gear reducer with 17.6:1 gear ratio, single stage feed screw...

Location: South USA

Add to Cart View Details

3.5″ Polytruder Extruder 34:1 L/D Non-Vented

Stock #ZP62223-2

3.5″ Polytruder Extruder 34:1 L/D Non-Vented

Stock #ZP62223-2

Used 3.5″ Polytruder 34:1 L/D non-vented extruder. Electrically heated air cooled barrel, driven by 125 HP DC motor with SCR control, 480 volt AC input. Has transformer base mounted, Flender gear reducer with 17.6:1 gear ratio, single stage feed screw...

Location: South USA

Add to Cart View Details

90mm Union Extrusion Spa. Single-Screw Extruder L/D 44:1 Non-Vented

Stock #ZP61648

90mm Union Extrusion Spa. Single-Screw Extruder L/D 44:1 Non-Vented

Stock #ZP61648

Used 90mm Union Extrusion spa. single-screw extruder. Has 44:1 L/D non-vented barrel, electrically heated and 5 zones with air cooling, and 4 zones with water cooling. Includes temperature control panel. Includes 50 HP motor but no drive. Includes screw for...

Location: N/A

Add to Cart View Details

3.75″ Berstorff Extruder L/D 17:1

Stock #ZP49072

3.75″ Berstorff Extruder L/D 17:1

Stock #ZP49072

Used 3.75″ diameter Berstorff model EG4/480 side feed cross head extruder. 17:1 L/D, electrically heated barrel with water cooling utilizing cast aluminum heaters. Has rotary union for screw. Gearbox rated at 56 kW but no motor included. 1982. Serial number...

Location: South USA

Add to Cart View Details

90mm Barmag Extruder L/D Non-Vented 30:1

Stock #626-10

90mm Barmag Extruder L/D Non-Vented 30:1

Stock #626-10

Used 90mm Barmag 30:1 L/D, non-vented Extruder. Type 9E10/30D, Serial #12/2407-3, new 1999. Has electrically heated air cooled barrel with 39″ centerline height. Has water cooled top center feed throat 4.5″ X 6″. Gearbox Model 9E805-32/6V with 10.002:1 reduction.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details