250 HP Hydraulic Drive Spare Motor For Dewatering Press
Stock #21532-101A
Used Siemens Max Duty 250 hp motor. 226 amps, 1785 RPM, 4491SC frame, 575 volt, 3 phase, 60 hz.
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
14" Diameter French Oil Dewatering Press
Stock #ZP59579
Used 14" diameter French Oil dewatering press previously used for LDPE pulped milk carton stock dewatering. 14" O.D. Screw, 110" long. New approximately 1978. Belt driven by a 400 HP AC motor supplying 125 rpm screw speed. Includes an N-series...
Location: South USA
Get a Quote View Details
Andritz-Dupps Model 3620 Dewatering Screw Press
Stock #20010-1
Used Andritz-Dupps model 3620 dewatering screw press with Falk gear box, 300 HP motor, control panel. Production 205 air dried metric tons per Day or 184 bone dried metric tons per day. Inlet consistency 4.0% BD, discharge consistency 30% BD....
Location: Northeast USA
Get a Quote View Details
Black-Clawson Single Screw Hydradenser Extractor
Stock #M2916-037
Used Black-Clawson single screw hydradenser extractor. 16" diameter X 6' long. 20 HP V-belt drive. 3/60/230-460 volt, 1775 rpm motor. Connected to a Falk reducer, 25.7:1 ratio.
Location: Northeast USA
Get a Quote View Details
Black-Clawson Single Screw Hydradenser Extractor
Stock #M2916-045
Used Black-Clawson single screw hydradenser extractor. (1) 16" diameter X 6' long screw. With a Falk reducer.
Location: Northeast USA
Get a Quote View Details
Dewatering screw press Thune model SP23 capacity 20 TPD
Stock #ZW63523
Used single screw dewatering press Thune model SP23 with the nominal capacity up to 20 TPD. Designed to operate on a paper fiber, board and pulp. Inlet consistency is between 3,5 and 5%, has regulated outlet consistency of between 35%...
Location: Europe
Get a Quote View Details
Dewatering screw press Thune model SP23 capacity 20 TPD
Stock #ZW63524
Used single screw dewatering press Thune SP23 model, nominal capacity up to 20 TPD. Designed for paper fiber, board and pulp. Inlet consistency is adjusted from 3.5 to 5% and outlet consistency from 35 to 0.5%. Stock temperature is 40...
Location: Europe
Get a Quote View Details
Erwepa Inclined Screw Thickener 9"
Stock #7704-10
Used Erwepa 9" inclined screw thickener. Stainless steel. With motor.
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
FKC Type SHX-1000 Screw Type Sludge Dewatering Press
Stock #781-1362
Used FKC type SHX-1000 sludge dewatering screw press. Serial # M-1340 new 1989-4. 47" X 37" feed opening, 9 screen sections with 3/16" holes with last 2 screens having an additional 1" holes screen on top. Stainless screw with steam...
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
FKC Type SHX-1000 Screw Type Sludge Dewatering Press
Stock #781-1363
Used FKC type SHX-1000 sludge dewatering screw press. Serial # M-1340 new 1989-4. 47" X 37" feed opening, 9 screen sections with 3/16" holes with last 2 screens having an additional 1" holes screen on top. Stainless screw with steam...
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
Hymac Thune SL70SL Housing
Stock #21532-953
Used Hymac Thune model SL70SL housing. Serial # 896041 stainless steel frame and base. 16 air operated back pressure flappers, stainless steel discharge housing, stainless steel top cover, stainless steel feed housing with bottom screen.
Location: Canada
Get a Quote View Details
Hägglunds Type MAZOOCN0600 Hydraulic Drive
Stock #20648-3SD
Used Hägglunds Type MAZOOCN0600 hydraulic drive. Serial #51202825, displacement 12575. Maximum pressure 350 bar rated at speeds of 45 R/M torque 200 NM/bar
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
Lamort-Baker M-16 Inclined Screw Thickener 16" O.D. x 86" Long
Stock #7704-06
Used Lamort-Baker M-16, 16" inclined screw thickener. Has 16" OD X 86" length. 14" X 25" feed and discharge opening. Stainless steel contact parts. With 18.5kW, 380 volt, 50HZ motor.
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
Pulp Press Stord Press MS64
Rice Barton Triple Screw Stainless Steel Water Extractor Thickener
Stock #M3938-001
Used Rice Barton triple screw stainless steel water extractor/thickener. 7.5 HP, 3/60. 575 volt Toshiba motor. Three (3) 9" screws. No top cover.
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
Rietz Model RSP-16-K2 Continuous Screw Dewatering Press
Stock #20597-03
Used Rietz model RSP-16-K2 horizontal continuous screw dewatering press. 16" diameter screw. Stainless steel contact parts. Equipped with 3 HP Cone motor. Requires main drive motor and gearbox. Mounted on I-beam steel base
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
Rietz Model RSP-16-K2 Screw Press
Stock #UG6198
Used stainless steel screw press for dewatering by Rietz S-Press model RSP-16-K2. Press is equipped with stainless steel screw with diameter 400 mm x length 2420 mm. Screw is working with adjustable speed. Shipping dimensions of press: W 1000 mm...
Location: PL
Get a Quote View Details Watch Video
Stord Bartz MS49 Twin Screw Press
Stock #RG9606
Used Stord Bartz MS49 twin screw press. Equipped with drive motor.
Location: Europe
Get a Quote View Details
Stord Model BS41FK Twin Screw Press
Stock #ZG59561
Used Stord model BS41FK twin screw press. 12" diameter X 10' long screws. Carbon steel construction. With heavy duty main cage and back up screen. Driven by 40 HP drive through reducer. Screw rotate counter current.
Location: West Coast USA
Get a Quote View Details
Thune Kvaerner SP32L Screw Press
Stock #20624-1
Used Thune Kvaerner SP32L screw press for pulp dewatering. Stainless steel covers with 3 window design, no back pressure paddles. Serial # NF8105101/238
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
Thune Mdl SP 70SL Hi-Cap Dewatering Screw Press
Stock #ZW63328
Used Thune Model SP 70SL Hi-Cap dewatering screw press. Year 2000. With Hagglunds drive.
Location: Northeast USA
Get a Quote View Details
Thune SP70SL Dewatering Screw Press
Stock #21532-101
Used Kvaerner Thune SP70SL dewatering screw press, Serial No. 89-6037. Rated at 300 BDMT/D. 4 inspection windows, stainless steel base and housing, 16 air operated back pressure valves, internal screw and screens, with Hagglunds Denison hydraulic drive type MA283N011 with...
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
Used Stord RS64S Beet Pulp Press
Vincent VP-30 Screw Press
Stock #875-113386
Used stainless steel screw press. Manufactured by Vincent Model VP-30 7'3" wide X 6'7" high x 25' long 30" screw with wedge wire 150 HP motor, Sumitomo PHD 9105 P4 gear box 147:1 ratio Bearing on each side of screw...
Location: South USA
Get a Quote View Details
Vincent VP-30 Screw Press
Stock #875-113387
Used stainless steel screw press. Manufactured by Vincent Model VP-30 7'3" wide X 6'7" high x 25' long 30" screw with wedge wire 150 HP motor, Sumitomo PHD 9105 P4 gear box 147:1 ratio Bearing on each side of screw...
Location: South USA
Get a Quote View Details