1 Meter Wide Komline Sanderson Kompress Model GRS-1 Dewatering Press
Stock #ZG63270
Used Komline Sanderson Kompress belt press model GRS-1 Series 111 dewatering press. 7’6″ wide X 8’6″ high X 18’2″ long Material of construction: stainless steel with galvanized frame Active width: 1.0 meter Filter belt width: 1.2 meters (47″) Filtration areas:...
Location: Northeast USA
Get a Quote View Details
25 Meter Wide Andritz CPF-VS Belt Press
Stock #ZG63177
Used Andritz CPF-VS 25 IF belt press. 25 m felt width 45 m3/hour capacity 304L stainless steel Installed 1994
Location: SPAIN
Get a Quote View Details
25 Meter Wide Andritz CPF-VS Belt Press
Stock #ZG63178
Used Andritz CPF-VS 25 IF belt press. 25 m felt width 45 m3/hour capacity 304L stainless steel Installed 1994
Location: SPAIN
Get a Quote View Details
1500 MM Width Sludge Belt Thickener DEWA Model BT-1525
Stock #UG6287
Used sludge belt thickener by DEWA DWT-Engineering (Finland) model BT-1525. Construction designed in stainless steel. Machine has belt with working width 1500 mm. Filtration surface 3.75 m2. Output on the sludge in range from 20-50 m3 with densified solids in...
Location: PL
Get a Quote View Details
1.0 Meter Wide Andritz Model CPF 1000 Belt Press
Stock #VL1233-01
Used model CPF 1000 S5 Andritz 1 meter belt press. Stainless steel contacts. Manufactured 1979 and used on municipal sludge. Can be used on paper, feed, and chemical Industries.
Location: Perry England Warehouse
Get a Quote View Details
1.0 Meter Wide Portable Model SMX-80 Belt Press
Stock #ZW62681
Used 1 meter portable SMX-8 belt press with drop deck trailer, consisting of the following: 1- Nema 4X control panel. Complete with starters & VFD’s. Includes all press, pump, conveyor controls. • 1 – Venturi stainless steel mixing valve with...
Location: South USA
Get a Quote View Details
1.5 Meter Wide Amos Type Apex 1600 Belt Press
Stock #UG5902
Used belt press by Amos type Apex 1600. Press has working width of belts 1500 mm. Reported output on fruits up to 14 tons/hour. Working speed of belt in range from 0-11 m/min. Shipping dimensions: width 4110 mm x length...
Location: Poland
Get a Quote View Details
1.8 Meter Wide Eimco Model 6’PA Continuous Belt Press
Stock #20687-15
Used Eimco stainless steel expressor model 6’PA continuous belt press. Belt width 72″, (1.8 meters), dewatering of slurries or cakes. Equipped with 40 HP hydraulic drive, control panel. Unused belt and spare rolls.
Location: On Site at Perry (Hainesport, NJ - USA)
Get a Quote View Details
2.3 Square Meter (25 Sq.Ft.) Verti-press Ef Filter, 25 Square Feet (2
Stock #ZG54390
Used Verti-Press EF filter, 25 square feet (2.3 square meter) Filtra system model VP-25-1-(2). Stainless steel, automized PLC smart panel, semi-batch operation. Diaphragm squeezing 100 psi can produce cakes as dry as 95% solids. Includes pumps and screw for feed...
Location: Mexico
Get a Quote View Details
2.5 Meter Wide Andritz CPF-VS Belt Press
Stock #ZG63176
Used Andritz CPF-VS 25 IF belt press. 2.5 m felt width 45 m3/hour capacity 304L stainless steel Installed 1994
Location: SPAIN
Get a Quote View Details
80″ Andritz 100 Ton Per Day Wet Lap
Stock #21442
Used Andritz twin wire belt press wet lap line with 40 hp belt press drive. Rated 100 ADTPD, 950 GPM @2%, with a typical dryness of 42% – 45% for this machine based on Kraft Pulp with a freeness of...
Location: Northeast USA
Get a Quote View Details