Blow Molders

.06 Gallon Uniloy Milacron Model R2000-90 12-Head Reciprocating Screw Blow Molder

Stock #20473-1

.06 Gallon Uniloy Milacron Model R2000-90 12-Head Reciprocating Screw Blow Molder

Stock #20473-1

Used Uniloy Milacron 12-head reciprocating screw blow molder. Model R2000-90, serial #5183, new 1999. Includes the following: – 12″ X 56″ clear platen with (12) heads on 4.5″ centers. No side shift. Includes belt driven 100 HP AC motor with...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

.25 Gallon Jomar Model 135E Injection Blow Molder

Stock #ZP61130

.25 Gallon Jomar Model 135E Injection Blow Molder

Stock #ZP61130

Used Jomar injection blow molder model 135E. New 1994. Consists of the following: – 3″ diameter screw with 25/1 L/D and 125 HP drive. – 135.4 ton Parisan clamp tonnage, 28 ton blow mold clamp tonnage. – 10″ shut height,...

Location: Midwest USA

Add to Cart View Details

.40 Gallon Krones Model K782-002 Blow Molding Package

Stock #ZP59055

.40 Gallon Krones Model K782-002 Blow Molding Package

Stock #ZP59055

Used blow molding package consisting of Krones 24-cavity Contiform stretch blow moulding machine, model K782-002. Has preform unloader, preform feeder, infeed conveyor, hopper, (5) sets of 24-cavity bottle moulds, and encircle chiller. Also includes palletizer system consisting of (1) pallet...

Location: Midwest USA

Add to Cart View Details

.5 Gallon Sidel Model SB08 Universal PET Pre-Form Blow Molder

Stock #ZP62512-2

.5 Gallon Sidel Model SB08 Universal PET Pre-Form Blow Molder

Stock #ZP62512-2

Used Sidel Model SBO8 Universal PET pre-form blow molder. 8-station design and includes change parts for 24, 30 and 40mm neck finish diameters. Upstream includes Pre-form Gaylord dumper and feed conveyor. Downstream includes Alps leak detector. Previously used on approximately...

Location: Northeast USA

Add to Cart View Details

.50 Gallon Sidel Model SB016 PET Stretch Blow Molder

Stock #ZP60980

.50 Gallon Sidel Model SB016 PET Stretch Blow Molder

Stock #ZP60980

Used Sidel model SB016 PET stretch blow molder, new 1996. Still installed as operated and reported in excellent condition, retro fitted for quick change, CW preform hoppers and includes unscramble and conveyors.

Location: IR

Add to Cart View Details

.50 Gallon Techne Model ADVT2 750 Dual Shuttle Blow Molder 3 Layer

Stock #ZP62512-3

.50 Gallon Techne Model ADVT2 750 Dual Shuttle Blow Molder 3 Layer

Stock #ZP62512-3

Used Techne Model ADVT2 750 dual shuttle blow molder, new in 2014. Previously used on high density polyethylene bottles and includes (3) extruders. Techne blow molder is all electric design with Servo clamp, Servo shutter, Servo Parison control. Previously used...

Location: Northeast USA

Add to Cart View Details

.56 Gallon Bekum Model BAE1 Single-Station Blow Molder

Stock #9773-4

.56 Gallon Bekum Model BAE1 Single-Station Blow Molder

Stock #9773-4

Used Bekum model BAE1 single-station blow molder. Serial #27712291. Manufactured in 1979. Lab use only. Unit is able to make up to 1.5 liter bottles, measuring 120mm in diameter and 320mm in height. Rated 50 cycles per minute. Extruder is...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

.63 Gallon Sidel Model SB016 PET Blow Molder

Stock #ZP60511

.63 Gallon Sidel Model SB016 PET Blow Molder

Stock #ZP60511

Used Sidel model SB016, Series 2 PET blow molder. Previously used on 2 liter (aseptic) bottles at 19,000 bottles per hour. Includes pre-form feeder, mold chiller, bottle inspection machines, and air conveyor.

Location: ASIA

Add to Cart View Details

.79 Gallon Krupp Corpoplast Model B80 Blow Molder

Stock #UP5943

.79 Gallon Krupp Corpoplast Model B80 Blow Molder

Stock #UP5943

Used blow molder by Krupp Coroplast model B80. Machine can work with maximal output up to 8000 pieces/hour. Range of volume of bottles from 200-3000 cubic meter. Maximal dimensions of bottle: length 350 mm x diameter 126 mm. Machine is...

Location: Poland

Add to Cart View Details

.52 Gallon Zentronik Model Z-2 PET Blow Molder

Stock #UG6128

.52 Gallon Zentronik Model Z-2 PET Blow Molder

Stock #UG6128

Little used blow molder for work on production PET bottles from preforms by Zentronik (Poland) model Z-2. Machine has two dies and can work on production PET bottles with volume up to 2.0 l. Machine has nominal output up to...

Location: Poland

Add to Cart View Details

1 Gallon Uniloy Model 350R4, 7 head bottle blow molder with trimmer

Stock #21011

1 Gallon Uniloy Model 350R4, 7 head bottle blow molder with trimmer

Stock #21011

Used Uniloy Model 350R4 blow molder, Serial #350R4-3854. Currently installed with (7) programmable heads with Maco 8000 control/programmer. Blow molder is equipped with 1600 gram shot capacity. Previously used on approximately 1 liter bottles. May accomodate gallon molds if utilizing...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

Sidel Model SBO 10 S1 Blow Molder

Stock #RG9385

Sidel Model SBO 10 S1 Blow Molder

Stock #RG9385

Used Sidel model SBO 10 S1 blow molder. 10,000 bottles/hour maximum. Neck finishing 28mm and pco corvaglia. 400 volt 3/50. Maximum installed power 220 kW. Air pressure 7 bar to a maximum 40 bar. Includes Octabin dumper and quick change...

Location: Europe

Add to Cart View Details

Sidel Model SBO 10 S2 Blow Molder

Stock #RG9384

Sidel Model SBO 10 S2 Blow Molder

Stock #RG9384

Used Sidel model SBO 10 S2 blow molder. 15,000 bottles/hour maximum. Neck finishing 28mm and 38mm. 400 volt 3/50. Maximum installed power 240 kW. Air pressure 7 bar to a maximum 40 bar. Includes Octabin dumper.

Location: Europe

Add to Cart View Details

Sidel Model SBO 14 Universal Blow Molder

Stock #RG9383

Sidel Model SBO 14 Universal Blow Molder

Stock #RG9383

Used Sidel model SBO 14 Universal blow molder. 28,000 bottles/hour maximum. Neck finishing 28mm and 38mm. 400 volt 3/50. Maximum installed power 495 kW. Air pressure 7 bar to a maximum 40 bar. Includes Octabin dumper and air recovery system.

Location: Europe

Add to Cart View Details

Krones / Kosme PET Bottle Forming and Filling Line

Stock #XRG8831

Krones / Kosme PET Bottle Forming and Filling Line

Stock #XRG8831

Used Krones / Kosme pet bottle forming and filling line reportedly made in 2007 with just 873 hours of use. Suitable for the following sizes: 0.5L (20.5G), 1.5L (39.5G) and 2 litres (47.5 grams). Capacity approximately 4500 bottles per hour...

Location: Europe

Add to Cart View Details

Sidel SBO 12 S2 Blow Moulder

Stock #RG9148

Sidel SBO 12 S2 Blow Moulder

Stock #RG9148

Used Sidel SBO 12 S2 blow moulder with maximum capacity 16,800 bottles/hour. Made in 2002, shut down in January 2016 with 45,000 hours of use. Currently dismantled and in storage. Can produce 0.5, 1.0, 1.5 and 2.0 litre bottles, neck...

Location: Europe

Add to Cart View Details

Toyo Model BMSR-VP-1400 X 260HD Rotary Wheel Continuous Automatic Bottle Blow Molder

Stock #ZP59628

Toyo Model BMSR-VP-1400 X 260HD Rotary Wheel Continuous Automatic Bottle Blow Molder

Stock #ZP59628

Used Toyo model BMSR-VP-1400 X 260HD 6-layer extrusion, 18-station rotary wheel continuous automatic bottle blow molder. Controls: Hunkar 311 series module programmer. Voltage: motors, 480 V; heaters, 220 V; control, 110 V. Capacity: 100 BPM (max). Body long diameter: 100mm;...

Location: Midwest USA

Add to Cart View Details

Techne 20000 Continuous Dual-Head Blow Molder

Stock #ZP61329

Techne 20000 Continuous Dual-Head Blow Molder

Stock #ZP61329

Used Techne 20000 blow molder year: 1992 serial no.: 18208 type: continuous extrusion head size: dual 330mm programming: 100 points extruder: 90mm, 24:1, air-cooled controls: Maco 6000 series motor drive: 125 HP DC extruder power: 460 volt, 3PH platen size:...

Location: Midwest USA

Add to Cart View Details