Search Result(s) for pelletizer

7.5″ Wide Solid Helical Rotor

Stock #7700-50

7.5″ Wide Solid Helical Rotor

Stock #7700-50

Used 7.5″ wide solid, helical rotor with 48 knives. 8″ diameter. Probably intended for use with 6″ Conair pelletizer.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

55#/MIN FUJI PAUDAL PV20 FINE DISC PELLETER

Stock #8670V-08

55#/MIN FUJI PAUDAL PV20 FINE DISC PELLETER

Stock #8670V-08

Little used Fuji Paudal model PV-20 fine disc pelletizer. 304 stainless steel contact parts. Rated 500-1500 kg/hr depending on product. Has (4) rotating wheels which push product through the die plate. Pellets fall onto rotating disc below and are marumerized...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

8″ Conair Jetro Model 108 Pelletizer with Helical Rotor

Stock #20261V

8″ Conair Jetro Model 108 Pelletizer with Helical Rotor

Stock #20261V

Used 8″ Conair Jetro model 108 pelletizer W/ helical rotor. S/N 9-080478. Equipped W/ hydraulic drive, 15 HP, 230/460 volt, 37.2/18.6 amps. Pelletizer mounted on 42″ platform W/ rails. Controls mounted on side.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

32″ Conair Model S3032GP Pelletizer

Stock #20233-1

32″ Conair Model S3032GP Pelletizer

Stock #20233-1

Used 32″ wide Conair pelletizer model S3032GP, serial #119651 mounted in a sound enclosed cabinet with air cylinder for raising and lowering hood. Pull rolls are air cylinder actuated. Pelletizer is a dual AC drive unit with individual drives to...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

8″ Conair Jetro Strand Pelletizer With Dual Drive

Stock #20250-6

8″ Conair Jetro Strand Pelletizer With Dual Drive

Stock #20250-6

Used 8″ Conair Jetro Strand pelletizer with dual drive. Has 24 kn bolt on style rotor. Pelletizer model 3508, serial #12-080679. 460 volt, 3 phase, 60 hertz. Includes 2 HP motor for pull roll drive, 15 HP motor for rotor...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

6″ Wide Conair Strand Pelletizer Model 206

Stock #20551-06

6″ Wide Conair Strand Pelletizer Model 206

Stock #20551-06

Used 6″ wide Conair Strand pelletizer Model 206. Order #93840, Serial #8-061890. Pelletizer will include (1) 24 knife wedge lock style helical rotor.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

6″ Conair Model 106 Pelletizer

Stock #ZP59346

6″ Conair Model 106 Pelletizer

Stock #ZP59346

Used 6″ model 106 Conair hydraulically driven pelletizer. Unit is driven by 5 HP hydraulic pumping system, 230 volt AC input. Includes operator controls, dual hydraulic motors for rotor and nip rolls. Previously used in Laboratory as R&D pelletizer.

Location: Northeast USA

Add to Cart View Details

12″ Automatik (Rieter) Model ASG300 Strand Pelletizer

Stock #20396-4

12″ Automatik (Rieter) Model ASG300 Strand Pelletizer

Stock #20396-4

Used 12″ automatic (Rieter) strand pelletizer model ASG300, serial # 18002-3188, new 12/1995. Unit is equipped with 30 knife solid helical rotor, power roller feed with pneumatic tension control, mounted on base with belt driven motor. Pelletizer reportedly rated up...

Location: Perry England Warehouse

Add to Cart View Details

8″ Cumberland “Quietizer” Strand Pelletizer

Stock #20841-3

8″ Cumberland “Quietizer” Strand Pelletizer

Stock #20841-3

Used 8″ Cumberland “Quietizer” Strand Pelletizer, new 1987. S/N 264550-B-87012. Pelletizer is equipped with a 16 knife bolt-on style rotor. Includes DC motor with SCR controller, currently mounted on stand supplying approximately 8 foot feed height.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

PTI Model CPF-3000 Water Ring Pelletizer

Stock #20360-2

PTI Model CPF-3000 Water Ring Pelletizer

Stock #20360-2

Used PTI model CPF-3000 water ring pelletizer. Includes operator control panel, dewatering trough for pellet/water separation, and spin dryer. Spare parts includes (2) pelletizing heads, heaters, and bearings. Previously used on 4.5″ extruder. Adapter is 4.5″ in diameter. Manufacture reports...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

14″ Cumberland Strand Pelletizer

Stock #573-08

14″ Cumberland Strand Pelletizer

Stock #573-08

Used Cumberland Strand pelletizer having a 14″ entrance with a 12-knife rotor. Bolt on style blades. Rotor and pull rolls are driven by approximately a 15 HP DC motor with SCR control. Serial number 54000-6140.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

12″ Conair Strand Pelletizer With 24 Knife Solid Helical Rotor

Stock #20250-7

12″ Conair Strand Pelletizer With 24 Knife Solid Helical Rotor

Stock #20250-7

Used 12″ Conair Strand pelletizer with 24 knife solid helical rotor. Model 112, serial #8-121176. Dual drive design with separate 7.5HP AC 208-230/460 volt motors for pull roll and rotor. Includes (2) inverter controls for each motor. Spare helical rotor...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

4″ Automatek Model ASG100 Strand Pelletizer

Stock #706-17

4″ Automatek Model ASG100 Strand Pelletizer

Stock #706-17

Used 4″ wide Automatek Strand pelletizer model ASG100. Has 20-knife Wedgelock style rotor and includes operator controls. Order #05160, serial #10000-3029. New 1992.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

6″ Cumberland Strand Pelletizer

Stock #606-19

6″ Cumberland Strand Pelletizer

Stock #606-19

Used 6″ Cumberland Strand pelletizer serial #26111-6875. Equipped with approximately 3 HP AC motor, has 16 knife bolt-on rotor. Currently mounted on stand supplying approximately 80″ feed height. Equipped with spring loaded nip rolls.

Location: South USA

Add to Cart View Details

Bepex Model GCS200/60 Stainless Steel Extruder/Pelletizer

Stock #L1098-06

Bepex Model GCS200/60 Stainless Steel Extruder/Pelletizer

Stock #L1098-06

Used Bepex model GCS200/60 stainless steel extruder/pelletizer. 200mm diameter X 60mm wide twin dies. Maximum throughput is 60 to 180 kg per hour. Stainless steel hopper. 7.5 kW, 240/480 volt main drive.

Location: Perry England Warehouse

Add to Cart View Details

12″ Conair Jetro Model 206 Strand Pelletizer

Stock #20018-1

12″ Conair Jetro Model 206 Strand Pelletizer

Stock #20018-1

Used 12″ wide Conair Jetro model 206 strand pelletizer. Driven by a 15 hp motor. Has gear driven pull rolls and replaceable 16-knife wedge lock rotor. Drive controls for 15 hp motor are missing.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

8″ Conair Jetro Model 208 Pelletizer

Stock #20415-15

8″ Conair Jetro Model 208 Pelletizer

Stock #20415-15

Used Conair Jetro pelletizer, model 208. Approximately 8″ wide X 6″ diameter, 36-blade helical rotor. Has (1) rubber, (1) metal pneumatically adjustable pull rolls. Driven by a 10 HP, 500 volt, 1750 rpm DC motor. Includes a control panel with...

Location: Midwest USA

Add to Cart View Details

1.0″ 40/1 PRISM 24MM MODEL TSE-24-TC

Stock #ZP61704

1.0″ 40/1 PRISM 24MM MODEL TSE-24-TC

Stock #ZP61704

One (1) used Prism pelletizing line consisting of the following: (1) Prism parallel twin screw extruder, model TSE 24TC, 24 mm co-rotating screws, 40:1 l/d, electrically heated, water cooled barrel, (3) top vents with (2) plugged, 6 barrel zones with...

Location: Midwest USA

Add to Cart View Details

(5) Blown Film Lines

Stock #ZP55017

(5) Blown Film Lines

Stock #ZP55017

(5) Blown film lines: (1) 55mm extruder for HDPE/LDPE, max film width 900mm. (1) 55mm extruder for HDPE/LDPE, max film width 900mm, Taiwanese, new 2009. (1) 55mm extruder for HDPE/LDPE, max film width 900mm, Taiwanese, new 2011. (1) 60mm extruder...

Location: Mexico

Add to Cart View Details

5500 BPM 1LTR BOTTLES ALL-FILL TYPE FILLING LINE

Stock #AG61854

5500 BPM 1LTR BOTTLES ALL-FILL TYPE FILLING LINE

Stock #AG61854

Used filling line for filling chocolate milk in to 1 liter bottles. Filling capacity 5500 bottles per hour. Currently machine setup for 1 liter bottle size but originally can be used from 0.250 liter up to 1 liter. Line includes...

Location: NORTH AFRICA

Add to Cart View Details

5500 BPM 1LTR BOTTLES ALL-FILL TYPE FILLING LINE

Stock #XAG61854

5500 BPM 1LTR BOTTLES ALL-FILL TYPE FILLING LINE

Stock #XAG61854

Used filling line for filling chocolate milk in to 1 liter bottles. Filling capacity 5500 bottles per hour. Currently machine setup for 1 liter bottle size but originally can be used from 0.250 liter up to 1 liter bottles line...

Location: NORTH AFRICA

Add to Cart View Details

6.2″ 33/1 SOREMA EXT VENT WRP12 PELLET

Stock #ZP61990

6.2″ 33/1 SOREMA EXT VENT WRP12 PELLET

Stock #ZP61990

Used 160mm Sorema pelletizing line consisting of the following: Sorema 160mm vented extruder with 33/1 L/D. Previously used on PE, PP and PS. Has 12 zone temperature control panel, hydraulic screen changer, Beringer model 12V pelletizer with centrifugal dryer but...

Location: United Kingdom

Add to Cart View Details

1.6″ 32/1 COMAC CO-ROTATE TWIN STRAND PELLET

Stock #ZP62242

1.6″ 32/1 COMAC CO-ROTATE TWIN STRAND PELLET

Stock #ZP62242

Used 40mm Comac twin screw pelletizing line consisting of the following: Comac co-rotating twin screw extruder Type EBC40, Series HT, 32/1 L/D screw length. 43mm nominal screw diameter. Has electrically heated water cooled barrel, (2) top vents (1 closed) including...

Location: South USA

Add to Cart View Details

60 HP ALLIS CHALMERS SCR STATIFLEX III

Stock #2364-19

60 HP ALLIS CHALMERS SCR STATIFLEX III

Stock #2364-19

Used Allis Chalmers semi conductor power converter units for 60 HP DC motors. Made by Allis Chalmers in Milwaukee, WI. Name-Statiflex III variable speed drive pelletizer. Type V5D-60NR-6THY. S/N 02-3034- 70451. Input 480 volt, 85 amp, 3 phase, 60 cycle....

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

Used Buss MDK/E 140-11D Single Screw Pelletizing Line

Stock #L1248

Used Buss MDK/E 140-11D Single Screw Pelletizing Line

Stock #L1248

Used Buss MDK-A 140-11D single screw pelletizing line with a capacity of 1100-3520 lbs./hr. (500-1600 kg/hr.) consisting of: (1) Buss K-nter, type MDK-E 140-11D. 11:1 L/D. 5.45” (140 mm) dia. x 60.06” (1540 mm) st. side screw. Max screw speed...

Location: EUROPE

Add to Cart View Details

PALLMANN DUAL DRIVE

Stock #ZP57792-1

PALLMANN DUAL DRIVE

Stock #ZP57792-1

Used Pallmann dual drive pelletizer with approximately 50 HP and 20 HP motors. Each motor is belt driven.

Location: Western USA

Add to Cart View Details

6.5″ BATTENFELD PLANETARY CRAM FEED PELLET

Stock #ZP61253

6.5″ BATTENFELD PLANETARY CRAM FEED PELLET

Stock #ZP61253

Used Battenfeld model ZSE170/250 planetary roller extruder pelletizing line. Package consists of ZSE170 roller extruder equipped with model SW170 crammer feeder, planetary roller extruder model ZSE170 and hot melt discharge extruder 250mm. Includes (2) heating/cooling temperature controllers, die head and...

Location: West Coast USA

Add to Cart View Details

5.9″ 33/1 RECYCLING LINE 500 KG/H

Stock #UP5937

5.9″ 33/1 RECYCLING LINE 500 KG/H

Stock #UP5937

Used line for recycling plastics, chinese made. Line includes: auger feeder driven by electric motor 7.5 kW. Single screw extruder with screw diameter 150 mm (5.9″) and 200=LD-200 ratio 33. Screw made of 38CrMoAl. Barrel has degassing and ten heating...

Location: Poland

Add to Cart View Details

7.8″ FRANCIS SHAW K28 BANBURY 200MM EXT

Stock #ZP53117

7.8″ FRANCIS SHAW K28 BANBURY 200MM EXT

Stock #ZP53117

Used Francis Shaw Banbury, compounding package consisting of the following: Francis Shaw K2a Banbury mixer with 600 HP DC Siemens motor 0-1500 variable rpm, 60 pound batch weight for material with specific gravity 1.0. Estimated 500-1500kg/hr capacity depending on materials....

Location: HU

Add to Cart View Details

15 HP US MOTORS 230/460 VOLT 200-1595 RPM

Stock #3036-7VD

15 HP US MOTORS 230/460 VOLT 200-1595 RPM

Stock #3036-7VD

Used united states motors vari-drive. 15 HP capacity, frame model 44-2541-41, type VEUTFGH 1750 rpm motor, 230/460 volt, 43.2/21.6 amps. Output speeds 200-1595 rpm. PREV. Used on 8″ Cumberland pelletizer.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

5.9″ 10/1 BAKER PERKINS KO-KNEADER

Stock #ZP50423

5.9″ 10/1 BAKER PERKINS KO-KNEADER

Stock #ZP50423

Used Baker Perkins KO-kneader pelletizing line consisting of the following: Baker Perkins UPK-150UEM 150mm KO-kneader, 10:1 L/D, split barrel, jacketed for 300 psi, powered by a 250 HP drive. Screw rpm 32-126. Includes size 6 Baker Perkins crammer, 10 HP,...

Location: Midwest USA

Add to Cart View Details

4.5″ 24/1 DAVIS 1978 VENT CONAIR PELLET

Stock #ZP60326

4.5″ 24/1 DAVIS 1978 VENT CONAIR PELLET

Stock #ZP60326

Used 4.5″ Davis standard single screw pelletizing line. Line consists of the following: 4.5″ Davis standard 1978 vented extruder with electrically heated air cooled barrel. Previously run on PP, ABS, HDPE. Extruder is Thermatic III model, has 17.36/1 gearbox and...

Location: South USA

Add to Cart View Details

2.7″ EREMA MDL PC906T

Stock #ZP61675-2

2.7″ EREMA MDL PC906T

Stock #ZP61675-2

Used 2008 Erema model PC906T/117 film recycling line consisting of the following: – 70mm Erema single screw non-vented extruder fed from Erema compacting/densifying hopper. Includes approximately 24″ wide X 20′ inclined conveyor, water ring pelletizer and operator controls.

Location: MEXICO

Add to Cart View Details

5.0″ 36/1 EREMA RM120TVE VENT NEW 2000

Stock #20663-1004

5.0″ 36/1 EREMA RM120TVE VENT NEW 2000

Stock #20663-1004

Used 120mm Erema model RM120TVE film/fiber pelletizing line new 2000. Line consists of the following: Erema model RM120TVE, serial #C99/138, 120mm extruder with 36/1 L/D double vented barrel. Extruder is driven by a 160kW AC motor with inverter. Double vent...

Location: Midwest USA

Add to Cart View Details

92mm Werner & Pfleiderer Model ZSK-92 W385E Twin Screw Pelletizing Line

Stock #796-139

92mm Werner & Pfleiderer Model ZSK-92 W385E Twin Screw Pelletizing Line

Stock #796-139

Used Werner & Pfleiderer 92mm twin screw pelletizing line consisting of the following: (1) ZSK-92 W385E 92mm co-rotating twin screw extruder, approximately 36:1 L/D ratio, serial 3226877, work #509941. Built 1987. (9) barrel sections with (1) feed with hopper, (2)...

Location: Midwest USA

Add to Cart View Details

1.0″ 28/1 PRISM 24MM CO-ROTATE STRAND PELLET

Stock #ZP61908

1.0″ 28/1 PRISM 24MM CO-ROTATE STRAND PELLET

Stock #ZP61908

Used 24mm Prism twin screw compounding extruder with pelletizing downstream. Line consists of a K-tron Volumetric feeder, 28/1 L/D co-rotating twin screw extruder with vented barrel, 3-hole Strand die, water bath air knife and 75mm wide (3) Strand pelletizer. Line...

Location: United Kingdom

Add to Cart View Details

3″ Hydreclaim Reprocessing Extruder

Stock #20175-515EXT

3″ Hydreclaim Reprocessing Extruder

Stock #20175-515EXT

Used approximately 3″ diameter Hydreclaim side fed film reprocessing extruder, previously used with Gala pelletizer and force feed fluff bin.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

3.5″ DAVIS STAND 1994 6″/3.5″ “SCRAPPER”

Stock #ZP61104

3.5″ DAVIS STAND 1994 6″/3.5″ “SCRAPPER”

Stock #ZP61104

Used Davis standard 350/600 dual diameter repelletizing line, new 1994. Has 6″ O.D. Feed screw tapering to 3.5″ O.D. Discharge. Driven by a 150 HP DC motor with SCR control. Has oversized feed throat for low bulk density material, 17.39/1...

Location: N/A

Add to Cart View Details

6.0″ 28/1 STERLING W/GALA

Stock #ZP62330

6.0″ 28/1 STERLING W/GALA

Stock #ZP62330

Used Underwater Pelletizing Line consisting of the following: – Crammer Feeder – 6′ 28/1 Sterling vented Extruder. Driven by a 400 hp motor. Has electrically heated, air cooled barrel. – Screen Changer – Underwater Pelletizer – Gala Spin Dryer –...

Location: Midwest USA

Add to Cart View Details

Sorema Extruder

Stock #RG9081

Sorema Extruder

Stock #RG9081

Used Sorema 160mm two stage extruder L/D 33:1, suitable for processing PE, PP, PS. Previously ran with a 250kW AC drive. Typically screw is ran at 100 rpm. Ceramic heater bands with fan assisted cooling on barrel. Feed throat measures...

Location: UK

Add to Cart View Details

4.0″ MUNCHY RECYCLING LINE

Stock #ZP56011-3

4.0″ MUNCHY RECYCLING LINE

Stock #ZP56011-3

Used Munchy recycling line consisting of: (1) Munchy single screw extruder, model P100, electrically heated, air cooled barrel, driven by a 69 kW DC motor through a gearbox, with control panel, Eurotherm 94 digital controller, Eurotherm 590 DC drive panel,...

Location: Midwest USA

Add to Cart View Details

EXTRU-TECH E325 EXTRUDER 30 HP FEEDER/COND

Stock #748-01

EXTRU-TECH E325 EXTRUDER 30 HP FEEDER/COND

Stock #748-01

Used Extru-Tech Model E325 extruder. 4-Zone 3.25″ diameter single jacketed 28″ long barrel, driven by 30 HP motor. Gearbox ratio 6:1. 4 hole hot cut pelletizer driven by 1.5 HP drive motor. Includes accurate feeder and EXTRU-tech model SCC6X30 conditioner....

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

6.0″ PROCESS CONTROL FLUFF HOPPER MDL RMR3 1984

Stock #8137-10

6.0″ PROCESS CONTROL FLUFF HOPPER MDL RMR3 1984

Stock #8137-10

Used 6″ process control fluff hopper model RMR3, serial number 11643a. New 7/17/84. Has approximately 1 HP DC motor but no motor control. Outlet of hopper is 6″ diameter but fluff screw is 3″ diameter dual chamber designed with chambers...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

Dynisco Model WRP35S Water Ring Pelletizing System

Stock #20280-43P

Dynisco Model WRP35S Water Ring Pelletizing System

Stock #20280-43P

Used Dynisco model WRP35S water ring pelletizing system W/TD15. Consists of Dynisco water ring pelletizer with 4-head cutter (only equipped with 2 blades), die plate with (3) rows of (120) approximately .093″ diameter holes, driven by a 3 HP 3/60/230/460...

Location: MIDWEST USA

Add to Cart View Details

1.1″ 40/1 LEISTRITZ MDL MICRO 27 1994

Stock #20746

1.1″ 40/1 LEISTRITZ MDL MICRO 27 1994

Stock #20746

Used pelletizing line consisting of: – American Leistritz 27mm 40/1 L/D co-rotating Model MICRO 27 twin screw extruder. Extruder new in 1994. Extruder is rated 500 rpm maximum screw speed, gearbox rated at 2 X 100 newton meter, 2700 rpm...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

Product Categories